IP DualDisplay Connections
From Zenitel Wiki
Introduction
The table below is an overview of the main connectors involved when installing the STENTOFON IP Stations.
| LAN | 10/100 Mbps RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
Power Supply
The IP Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.
Network Connection
There is one RJ45 port located at the bottom of the IP Dual Display station that is used as the LAN port.
