Virtual IO - Examples

Virtual I/O is a feature for activating scripts on station events.

The scripts mentioned in this article can be downloaded here.

Controlling relays located in safe area

Sometimes due to security requirements it is not allowed to operate the door lock from the relay in the Turbine station outside the door.

Instead of operating the relay in the door station, one can use the "Virtual I/O" feature to control the relay of an I/O unit (e.g. TKIS unit) which is located in a secure area.

There are three different scripts for relay control.

RelayOn_v1.lua: Turn relay ON
RelayOff_v1.lua: Turn relay OFF
RelayTimer_v1.lua: Pulse the relay for a set time

Upload the script

Download and unzip the scripts on your PC
Select SIP Configuration > Script Upload, and click Browse to upload the scripts to the station

Upload the scripts to the station

Script configuration
The RelayOn_v1.lua script requires 3 parameters:

lua RelayOn_v1.lua <username> <password> <Turbine IP address>

username is by default admin
password is by default alphaadmin
Turbine IP address is the IP address in dot notation

To configure the script, select SIP Configuration > Script Configuration

Configuration for RelayOn script

The RelayOff_v1.lua script requires 3 parameters:

lua RelayOff_v1.lua <username> <password> <Turbine IP address>

username is by default admin
password is by default alphaadmin
Turbine IP address is the IP address in dot notation

Configuration for RelayOff script

The RelayTimer_v1.lua script requires 4 parameters:

lua RelayTimer_v1.lua <username> <password> <Turbine IP address> <Timer>

username is by default admin
password is by default alphaadmin
Turbine IP address is the IP address in dot notation
Timer is the relay pulse time in seconds

Configuration for Relay with timer script

Script Event assignement
After a script slot has been created the user can choose which event(s) which will start the script(s).

TruPortal Integration

By using Virtual I/O the Pulse system trigger a script that can control the door lock in a TruPortal system.

Upload the script

Script configuration
TruPortal script requires 4 parameters:

username
password
TruPortal device IP address
Door number to activate

Script Event assignement
After a script slot has been created the user can choose which event(s) which will start the script.

Milestone Integration

By using Virtual I/O the Pulse system trigger a script that can control the Milestone Video Management System. In this example we want to activate a camera when the Turbine station calls the reception. The camera should switch off when the conversation ends.

Upload the script