AlphaCom 12.05 - Release Notes

Abstract

This article provides the release notes for AlphaSys 12.5 with incremental bug fix release.

Software in production: AMC 11.2.3.10

Note: For each software version the NVRAM version is listed. If the NVRAM version is different, the AlphaCom InterCom configuration will get default configuration, and then you must do a SendAll from AlphaPro to restore the configuration. All AlphaWeb configuration will be kept.

Release info 12.5.2.0

Name: bsp_32.00.3.1_AS_12.5.2.0.apkg
Description: This software includes both AlphaSys and BSP 32.0.3.1
AlphaSys 12.5.2.0 software only runs on AMC 11 hardware and require use of STIC
NVRAM Version: 12.5 (Note: NVRAM config is kept if upgrading from a previous 12.x version)
Date: 20.03.2018
Status: Limited Availability

• NOTE 1 : This is not an upgrade to v. 11.6.x.x versions. It should not be installed in same location as older AlphaPro versions.
• NOTE 2: Since AlphaPro version 11.5.x.x there is no support for serial communication which is needed to configure AMC9. For AMC9 and mixed networks AlphaPro 11.2.x.x must be used!