ENA User Interface
From Zenitel Wiki
This article describes how to use the GUI on the ENA amplifier.
The user’s means of interaction with the amplifier is through the menu selection knob.
The knob is located next to the display and can be turned clockwise and counter clockwise, as well as being pressed.
Contents
Items in the menu system are selected by turning the menu selection knob:
- Clockwise rotation will move the “selector” to the right or down
- Counter-clockwise rotation will move the “selector” to the left or up
Whether the selector is moved up/down or left/right depends on the current menu displayed.
- Press the menu selection knob to activate the selected menu item
- Press and hold the knob to return to the previous view
To change or input the parameter values in the selected menu item:
1. Turn the knob to move between the parameter fields
2. Press the knob to select the parameter field
- The field turns green to indicate that it is selected and ready for input value
3. Turn the knob to change the parameter value
4. Press the knob to select the parameter value
Access Control
Exigo has two PIN code access levels.
The user needs to enter a 4-digit PIN code to get access to the menu (when EMT is set up with menu access control).
The default access PIN codes are:
- 1111 - Level 1 (User 1)
- 2222 - Level 2 (User 2)
Menu Structure
The menu is divided into three main categories: Service, Setting, Information.
Service
- Local Message List
- Headphone
- Tick Tone
- Audio Output State
- Backup Amplifier Control (only in Backup Amplifier menu)
- Restart & Restore
Settings
- General
- Audio Output Monitoring
- Audio Output Volume
- Audio Input Gain
- Display
Information
- Device Info
- Network
- Attached Devices
- Control Input
- Control Output
- Diagnostic