AMC-IP - AlphaCom Processor Board (Black)
From Zenitel Wiki
The new AlphaCom XE processor board comes with more features, greater flexibility and increased audio bandwidth. AlphaCom XE utilizes true IP audio edge devices (IP master stations, IP substations and SIP stations) that provide HD Voice, active noise cancellation, adaptive jitter buffering, and an integrated managed switch with advanced networking and security functions (VL AN, IEEE 802.1X).
Contents
Highlights
- Made to provide critical communication in any environment
- Supports 552 IP stations
- Global networking and integration
- IP, SIP and analog station support
- Extended Software Options
- SIM card based software configuration and disaster recovery
- Backwards compatible with older AlphaCom systems
- Extended memory supports future expansion and new services
- High quality professional PA broadcasting and messaging services
- Security voice guidance for public safety and building security
- Auto-attendant functionality (Automatic voice supported switchboard)
- Voice supported call guidance
Installation
Inserting the STIC
Before inserting the AMC-IP board into the AlphaCom XE Server, a STIC (STentofon Identity Card) must be inserted in the the AMC-IP board. The STIC looks like the SIM card you use in mobile phones. There are two different versions of the STIC, one is for the XE1/XE7 servers, and one for the XE20/XE26 servers. Amonst other things, the STIC contains the MAC address of the AMC-IP board.
Install the STIC card by inserting it into the SIM Card socket on the AMC-IP board.
Click here for more details about the STIC.
Inserting the AMC-IP Board in the AlphaCom XE Server
- AlphaCom XE20 and XE26 exchanges: The board plugs into board position 25
- AlphaCom XE7 exchange: The board plugs into board position 7.
|
|
Filter Board
In the AlphaCom XE20 and XE26 exchanges a filter and connection board must be inserted from the rear side of the cabinet in the same card position as the AMC-IP card.
Switches and Jumpers
The AMC-IP version 11 board has two 8-bank DIP switches and four jumpers set to default positions at delivery.
|
|
Do NOT change the default settings unless you are absolutely sure of the consequences! |
Serial Port Connections
AMC switch S601 – 1 on:
- Serial port 0: AlphaPro
- Serial port 1: Linux Console (115.200 baud, N, 8, 1)
AMC switch S601 – 1 off:
- Serial port 0 and 1 controlled by the AMC (EDO, MPC data, Pager, ACDP etc.)
LED indicators
The card has a number of LEDs to indicate the board and Ethernet status.
Compatibility
The black AMC-IP processor board can replace the red AMC-IP board in existing AlphaCom E7, E20, E26, 80+ and 138 servers. The Black AMC-IP card provides full backward compatibility in both software and hardware. All traditional AlphaCom services and interfaces are supported. The card can even support traditional AlphaCom feature cards and cabinets, allowing STENTOFON AlphaCom 80+ and AlphaCom 138 to be upgraded with AlphaCom XE features.