Actions

TFIE Indication LEDs

From Zenitel Wiki

Revision as of 08:48, 12 April 2019 by Asle (talk | contribs) (LEDs in Front Panel)

LEDs in Front Panel

TFIE Indications 1.PNG


  • Power (Green): Steady light when power is OK
  • Fault (Yellow): Flashing when the station is not registered/no connection to server
  • Call (Red): Steady light during a conversation/call


LEDs in Function Keys/DAK keys

When a TFIE station is used in AlphaCom mode, the LEDs in the DAK keys can be controlled from the Event Handler by using the IND command.


Status LEDs on PCB

TFIE Board Indications 1.png


  • Flashing 2 red + 1 green: Station has no connection to the AlphaCom server/exchange.
  • Flashing 1 red + 2 green: Station connected but NOT registered in the AlphaCom server/exchange.
  • Flashing 3 green Station connected and registered in the AlphaCom server/exchange.


Ethernet Activity & Speed LEDs on PCB

TFIE Board Indications 2.png


Green LED:

  • Steady light: Ethernet connection OK
  • Flashing: Ethernet data traffic
  • No light: No Ethernet connection

Yellow LED:

  • Steady light: 100 Mbit Ethernet connection
  • No light: 10 Mbit Ethernet connection