TCIS Indication LEDs

LEDs on Front Panel

Status LEDs

• Bell icon lights yellow when a call is placed and ringing
• Talk icon lights green when a call is active and in conversation
• Door icon lights red when the door is unlocked or relay is active

Call button:

• Steady dim light: Station is successfully registered to the server.
• Flashing light: The station fails to register. Check the network and network cables, and the IP settings and account settings configuration in the station or in the server.

Talk Icon: Flashing at 1 second intervals:
Station has no connection to the server.

Possible reasons:

• No connection to Ethernet
• Wrong server IP address configured
• Invalid IP address
• No default gateway address or wrong gateway configured

Talk Icon: Flashing at 5 second intervals:
Station has TCP connection to the server, but fail to register.

Reason:

• Station has not been programmed in AlphaPro

LED indicators on the printed circuit board

LED indicators

Power LED

One blue LED indicates if the station receives power.

• Blue LED on: The station receives power

Ethernet status LEDs

Two LEDs (green and yellow) indicates the status of the ethernet link.

• Green LED
  • Steady light: Ethernet link is OK
  • Flashing: Ethernet link is OK, data traffic
  • No light: No Ethernet link. Check the ethernet cable and network switch

• Yellow LED
  • Steady light: 100 Mbit Ethernet connection
  • No light: 10 Mbit Ethernet connection

Registration status LEDs

Two LEDs (green and red) indicates if the station is registered.

• Flashing green: Station is successfully registered to the server.
• Flashing two times red + one time green or one red + two green: The station fails to register. Check the network and network cables, and the IP settings and account settings configuration in the station or in the server.