Recorder 2.0 no audio recorded
From Zenitel Wiki
Revision as of 04:12, 20 July 2020 by ZenitelAus (talk | contribs) (Created page with "Incorrect Recorder Initial Configuration can cause the recorder to act as if it's working, but there is no audio packets recorded. Check to ensure that the IP Address set in...")
Incorrect Recorder Initial Configuration can cause the recorder to act as if it's working, but there is no audio packets recorded.
Check to ensure that the IP Address set in the Recorder Initial Configuration is that of the PC performing the recording, and not that of the ICX-AlphaCom or AlphaCom Server.
Note that this IP Address also cannot be the link-local address (127.0.0.1), as it's used to direct the ICX-AlphaCom or AlphaCom server to send the audio packets to this address.