Gallagher
From Zenitel Wiki
Revision as of 05:25, 11 October 2022 by ZenitelAus (talk | contribs) (Created page with "{{S}} This article is to describe the configuration of the Zenitel device to work with the Gallagher solution. =Functionality= The Gallagher server acts as a SIP client with n...")
This article is to describe the configuration of the Zenitel device to work with the Gallagher solution.
Functionality
The Gallagher server acts as a SIP client with no registration.
It accepts unsolicited Direct IP Calls and routes these calls to workstations.
Workstations can answer the call and receive audio and video via the GUI.
Workstations can place a call and receive audio and video via the GUI.
Calls can be placed on hold.
Calls can be transferred to other operators.
Stations can be monitored for their connection to the network and generate an alarm if disconnected
Configuration
Turbine
The DAK key needs to point to the IP Address of the Gallagher Server
No other configuration is required.
Gallagher
Each station should be programmed as sip:default@<IP Address>
Known Issues
- Due to the lack of Registration, the device will behave as if it's unregistered.