Upgrade ICX-AlphaCom Core to Ubuntu 22.04
From Zenitel Wiki
Ubuntu 18.04 LTS is reaching the end of it's General Support period.
From ICX 1.2.3.9, it's now possible to upgrade the Ubuntu OS to 22.04LTS, which is the current Long Term Support version of Ubuntu.
The Upgrade requires several steps.
- Backup your System.
- Upgrade your ICX-AlphaCom Core to 1.2.3.9
- Update and upgrade your current Ubuntu 18.04 with the current security and software updates
- Upgrade your current Ubuntu 18.04 to the latest Linux distribution
- Upgrade your current Ubuntu 18.04 to 20.04
- Upgrade Ubuntu 20.04 to 22.04
Your Ubuntu OS will now be 22.04.
The ICX-AlphaCom system requires an internet connection for this process to take place and the system must be rebooted several times. |
Contents
- 1 Backup your System
- 2 Upgrade your ICX-AlphaCom Core to 1.2.3.9
- 3 Update and upgrade your current Ubuntu 18.04 with the current security and software updates.
- 4 Upgrade your current Ubuntu 18.04 to the latest Linux distribution.
- 5 Upgrade your current Ubuntu 18.04 to Ubuntu 20.04
- 6 Upgrade Ubuntu 20.04 to 22.04
- 7 Related articles
Backup your System
Use the System Maintenance / Backup tool to take a backup of your system.
More information is available from here; ICX Web#Backup and Restore
You can also use the VM host to take a snapshot of the current status of the system.
Upgrade your ICX-AlphaCom Core to 1.2.3.9
This step is performed using the Upgrade tab in System Maintenance on ICX-Web.
More information is available from here; ICX_Web#System_Upgrade
If you are upgrading from ICX-AlphaCom Core 1.2.3.7 or below, you must add the php8.1 repository prior to upgrade. |
If you need to add the php8.1 repository, from the linux console enter the following command.
sudo add-apt-repository ppa:ondrej/php
|
Update and upgrade your current Ubuntu 18.04 with the current security and software updates.
From the linux console, enter the following command.
sudo apt update && sudo apt upgrade -y
|
Once the process has completed, issue the following command.
sudo reboot
|
Upgrade your current Ubuntu 18.04 to the latest Linux distribution.
This step depends on whether the Linux Kernel of the Ubuntu 18.04 system has also been updated.
From the linux console, enter the following command.
sudo apt dist-upgrade -y
|
Once the process has completed, check if there have been any changes made.
If there are changes made, issue the following command.
sudo reboot
|
Otherwise, continue with the following step.
Upgrade your current Ubuntu 18.04 to Ubuntu 20.04
This step will upgrade your Ubuntu system to the intermediate step of 20.04.
From the linux console, enter the following command.
sudo do-release-upgrade
|
- If you are connected to the Ubuntu OS via SSH, you will receive a warning message regarding the loss of connection should something fail. Note the warning message and press Y to continue, followed by Enter at the next screen. If you are directly connected using the VM Console, you will not receive this message.
- At the Third Party Sources warning, press Enter
- At the Download warning message, press Y to continue.
- At the Configuring libc6 pop-up box, choose Yes to restart services without asking
- At the Configuring lxd pop-up box, choose 4.0
- At the Configuring openssh-server pop up box, choose Keep the local version currently installed
- At the snmp.conf warning, press Enter to select the default option
- At the Obsolete Packages warning, choose Y to remove the unused packages
- Finally, at the completion of the upgrade, choose Y to reboot the system
Upgrade Ubuntu 20.04 to 22.04
This step will upgrade your Ubuntu system to the final step of 22.04
From the linux console, enter the following command.
sudo apt update && sudo apt upgrade -y
|
Once the process has completed, check if there has been any changes made.
If there are changes made, issue the following command.
sudo reboot
|
Otherwise, continue with the following step.
From the linux console, enter the following command.
sudo do-release-upgrade
|
- If you are connected to the Ubuntu OS via SSH, you will receive a warning message regarding the loss of connection should something fail. Note the warning message and press Y to continue, followed by Enter at the next screen. If you are directly connected using the VM Console, you will not receive this message.
- At the Download warning message, press Y to continue.
- At the Configuring openssh-server pop up box, choose Keep the local version currently installed
- At the Obsolete Packages warning, choose Y to remove the unused packages
- Finally, at the completion of the upgrade, choose Y to reboot the system