Call List (Zenitel Connect Pro)

Introduction

The station models TCIS-6, TCIV-6+, TEIV-1+ and TFIE-6 have dedicated buttons for scrolling through a Call List/Adresss Book.

The Call List is edited in the Zenitel Connect Pro web interface, and then pushed out to the individual devices.

Configuring the Call List

• Navigate to Devices and Connections > Configuration
• Select the device of which the Call List needs to be configured
  • It is not possible to multi-select devices to edit their Call List
• Click on the icon labeled Buttons
• If no entries are configured yet in the Call List, click the in the Call List section
• It is possible to define maximum 50 entries in the Call List, define
  • Dial String
  • Label - the label is what will be shown on the OLED display of the device when an entry is selected
• An entry can be deleted by clicking
• Add a new entry below is specific entry by clicking the
• Change the place of an entry in the Call List by clicking the Up or Down arrow

• Click Save
  • Press the TAB-button on the PC keyboard, or use the mouse to select another field if the Save button is not visible.