Description of standard DVA files

DVA01 - Evac message (Building, Male) Attention gaining Tone x 7 "Attention please, attention please. Fire has been reported in the building. Please leave the building immediately by the nearest exit."

DVA02 - Alert message (Building, Male) Attention gaining Tone x 4 "May I have your attention please, may I have your attention please. Fire has been reported in the building. This report is being investigated. Please remain at your workplace whilst the fire alert exists."

DVA03 - Test Start Message (Building, Male) “May I have your attention please? May I have your attention please. The fire alarm system is about to be tested. Please take no further action.”

DVA04 - Test Finish Message (Building, Male) “May I have your attention please? May I have your attention please. The fire alarm test is now complete. If you had any difficulty in clearly hearing any part of the message, please advise the main reception.”

DVA05 - Public Address System Test Message (Female) "Public Address System test. This is a test of the Public Address System. This is a functional test for : system operation; loudspeaker coverage; signal level and speech intelligibility."

DVA06 - Evac (Building, Female) "Attention please x2. An incident has been reported. Please leave the building immediately by the nearest point."

DVA07 - Alert (Site, Female) "May I have your attention please x2. An incident has been reported on the site. Please remain at your current location and await further instructions."

DVA08-DVA60 (Male) - Slot number "Message slot X"

DVA61 - 1kHz tone

DVA62 - Speech shaped pink noise

DVA63 - Pink noise full bandwidth

DVA64 - Polarity

DVA65 - 1 note chime

DVA66 - 2 note chime

DVA67 - 3 note chime

DVA68 - whoop x 4