Actions

Zenitel IP Speaker connectors

From Zenitel Wiki

Revision as of 10:20, 6 January 2025 by Roarl (talk | contribs)
AEIS.png



ZIPSConnections.png


Pin Description Comment
GPIO General Purpose In Out
5V+ 5 volt output
Ext speaker (8ohm) Connection for external 8 ohm loudspeaker (positive connector)
Ext speaker (8ohm) Connection for external 8 ohm loudspeaker (negative connector)
Int speaker (8ohm) Connection for internal 8 ohm loudspeaker (positive connector)
Int speaker (8ohm) Connection for internal 8 ohm loudspeaker (negative connector)
7 Relay CO Relay output, Common
8 Relay NO Relay output, Normal Open
9 Line in/Mic Audio input (positive connector)
10 Line in/Mic Audio input (negative connector)
11 GND Ground connector
Note icon

¹) Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².


Note icon
  • Relay switching capacity: Max. 9 watt (Max voltage: 60VAC/60VDC. Max current: 160mA)
  • The 5V output can deliver TBA mA current maximum



MediaWiki spam blocked by CleanTalk.