ICT Protege GX (ICX-AlphaCom Integration)

Introduction

This article describes how you integrate Protege GX and an ICX-AlphaCom system to incorporate audio communication into Protege GX’s integrated access control and intruder detection system.

Prerequisites

The following prerequisites are required:

An operational Protege GX 4.3.285.21 or later system.
An PRT-GX-SIP-10 license for Progete GX.
A ICX-AlphaCom server with proper licensing. In the ICX-AlphaCom server, a "SIP station" license (item no 1002600700) is required for each Protege GX workstation

Integration Overview

Communication between ICX-AlphaCom and Protege GX is through SIP. Video from the Zenitel devices or an external IP camera is supported using RTSP.

System overview

The following instructions outline the steps required to configure the integration:

Configure the Zenitel ICX-AlphaCom server
Programming the Camera
Programming the Workstation
Associating Zenitel devices with doors
Creating a Floor Plan
Testing the Integration

Configure the Zenitel ICX-AlphaCom server

The Directory Number (SIP User ID) and Name of the Protege GX client must be configured in the ICX-AlphaCom server.

In AlphaPro, open Users & Stations and select a free user from the list box.
Enter Directory Number and Display Text, and enable the "SIP Station" flag. Set Codec = G.722.
Select Send All or Send Change to update to the ICX-AlphaCom server

Configure ICT Protege GX

Programming the camera

If the Zenitel intercom device is a video device, or if you’d like to use an external IP camera, create a camera for the intercom in Protege GX as follows:

1. In Protege GX, navigate to Monitoring | Setup | Cameras.

2. Click Add to create a new camera.

3. Define a Name for the camera.

4. Set the Type to “H.264 & Motion JPEG Stream Camera”.

5. Set the URL to the address of the camera stream. You may need to refer to the device’s documentation to determine the proper URL.

6. Click Save.

Programming Zenitel intercom devices in Protege GX

1. Navigate to Monitoring | Setup | Intercoms.

2. Click Add to create a new intercom.

3. Define a Name for the intercom. Consider matching the Name of the Intercoms in the ICX-AlphaCom

4. In the URI field, enter the address necessary to establish a connection to the Zenitel intercom device. This address should be in the form of Number@IP_Address. For example, if the intercom’s number is 101 and its IP address is 192.168.1.125, define the URI as 101@192.168.1.125.

5. If you created a Camera for this intercom device, use the drop down to select the camera you created in step 3 of “Programming the Camera”.

6. Click Save.

Programming the Protege GX Workstation

1. Navigate to Events | Workstations.

2. Click Add to create a new Workstation.

3. Set the Name for the workstation to match the username given to the 3rd Party SIP Device user being used for this integration.

4. Set the Computer Name to the hostname of this PC.

5. Set the Server Address to the IP address of the ICX-AlphaCom controller.

6. Set the Account Name to the Directory Number given to the SIP user being used for this integration.

7. Leave the Password blank

8. Set the SIP Port to match the port used by the Zenitel intercom device (typically 5060).

9. Choose the Microphone from the drop-down list of available microphones on this PC.

10. Choose the Speakers from the drop-down list of available speakers on this PC.

11. Click Save.

Associating Zenitel intercom devices with a Door

1. Navigate to Programming | Doors.

2. Select a door.

3. Set Intercom (Entry) to the name of the Zenitel intercom device you programmed.

4. Click Save.

Creating a Floor Plan

1. Navigate to Monitoring | Setup | Floor Plan Editor.

2. Click Add to create a new floor plan.

3. Define a Name for the floor plan.

4. Click OK.

5. Expand the Devices section in the right-hand panel of the floor plan.

6. Click the Add button to add a device.

7. In the resulting Door list, highlight the door you associated with the intercom and drag-and-drop this door into the floor plan.

8. Click Close to close the Door list.

9. Click Save

Testing the Integration

1. Verify the new SIP client has successfully been registered with the SIP server by clicking on the telephone icon in the lower left corner of the Protege GX client. You should see a “Registered with Server” message such as the one shown below.

2. In the floor plan, right-click on the door you associated with the intercom device and then click the Call Intercom button from the resulting dialog.

3. Verify you can successfully communicate with the intercom device. Also, if you have associated a camera, verify you can successfully view its live video.

4. Click the Unlock Door button and verify the door associated with the intercom device unlocks.

5. Close the intercom dialog.

6. On the Zenitel intercom device, press the Call button to initiate a call to Protege GX

7. In Protege GX, verify an Intercom Call dialog appears on the screen.

8. Click the Accept button.

9. Verify you can successfully communicate with the intercom device. Also, if you have associated a camera, verify you can successfully view its live video.

10. Click the Unlock Door button and verify the door associated with the intercom unlocks