Device

All data messages are addressed to a device. A device is always related to (owned by) a node. A full device address consists of <node> <device>.
<Device> is one byte.
Note that devices can both be physical boxes (e.g. RIO) or a function (Router).

Value (decimal)	Value (Hex)	Device Function
0	0x00	Invalid device (reserved NULL value)
1 - 64	0x01 - 0x40	External boxes. RIOs, PCs etc.
SET_RCO	Turn the given remote control output on
SET_RCO_OK	Positive response to the SET_RCO message
SET_RCO_FAILED	Negative response to the SET_RCO message
CLEAR_RCO	Turn the given remote control output off
CLEAR_RCO_OK	Positive response to the CLEAR_RCO message
CLEAR_RCO_FAILED	Negative response to the CLEAR_RCO message
PULSE_RCO	Generate a pulse with the defined length
PULSE_RCO_OK	Positive response to the PULSE_RCO message
PULSE_RCO_FAILED	Negative response to the PULSE_RCO message
POLL_RCI	Poll the given remote control input once
SCAN_RCI_ONCE	Scan input until defined condition is met, then report to exchange
SCAN_RCI_ACK	Positive response to the SCAN_RCI_ONCE message
RCI_IS_ON	Response to the POLL_RCI and SCAN_RCI_ONCE messages, input pin is on
RCI_IS_OFF	Response to the POLL_RCI and SCAN_RCI_ONCE messages, input pin is off
SCAN_END_ACK	Acknowledgment to the RCI_IS_OFF and RCI_IS_ON messages