SCAN RCI ONCE
From Zenitel Wiki
Revision as of 15:08, 25 October 2007 by 10.5.101.114 (talk)
| SCAN_RCI_ONCE | 0x0020 | 32 | AMC 05.00 | |
|---|---|---|---|---|
| $SCAN W1 U3 U5 | ||||
| Scan input until defined condition is met, then report to exchange. | ||||
| 1 | UINT2 | Input pin number | ||
| 2 | UINT1 | Scan mode: <br\>0 = Stop scan <br\>1 = Report when input is off <br\>2 = Report when input is on <br\>3 = Report when input changes (both on and off) | ||
| 3 | UINT1 | Stabilization time. Unit = 10ms. | ||
| Response: | SCAN_RCI_ACK | |||