AUDIO M PATH SETUP
From Zenitel Wiki
| AUDIO_M_PATH_SETUP | 0x8016 | 32790 | AMC 07.00 | |
|---|---|---|---|---|
| AlphaNet: Communication in a multi-node network. Set up a audio distribution path from a source node to multiple destination nodes. Typically used for Global Group call.
<br\>Reference: Selected by originator | ||||
| 1 | UINT1 | Channel number. <br\>0 = request for channel. | ||
| 2 | UINT1 | Priority<br\>0x00 ... 0x0F | ||
| 3 | UINT1 | Starting node of audio path. | ||
| 4 | VBITMAP[..N] | Destination nodes for audio path. | ||
| 5 | UINT1 | Parent local reference for next node | ||
| 6 | UINT1 | Type of audio connection: <br\>1 = audio distribution. <br\>2 = Switchable source for connection ?<br\>3 = IP audio distribution. (field 7,8,9 added) | ||
| 7 | UINT4 | Prev node Audio RTP IP address for next node (AMC 10.00) | ||
| 8 | UINT2 | Prev node Audio RTP port number for next node (AMC 10.00) | ||
| 9 | UINT1 | Audio Codec In use<br\>1 = G711ulaw<br\>2 = G711alow<br\>3 = G722 | ||
| 10 | PAYLOAD | End-to-end message. See below | ||
| Response: | AUDIO_M_LINK_OK, AUDIO_M_PATH_OK | |||
| <br\>PAYLOAD MESSAGE attached to AUDIO_M_PATH_SETUP and related messages<br\> | ||||
| align=center|1 | UINT1 | Protocol version:<br\>0 = AlphaCom basic functions | ||
| align=center|2 | UINT1 | Remote function:<br\>2 = Group Call | ||
| align=center|3 | UINT2 | Reference to be used in messages addressed directly to initiator. | ||
| align=center|4 | UINT1 | Global group number | ||