Languages
From Zenitel Wiki
Contents
Display Texts in the Stations
Display texts in the AlphaCom system are available in the same languages as for voice messages:
| * Norwegian | * German | * French |
| * Finnish | * English | * Swedish |
| * Danish |
For display texts, all of these language options are included in the system software. You select the display language you want during commissioning of the exchange. If you want display texts in other languages than specified above, please contact STENTO ASA, Development & Engineering Department, for further information.
Additional Information
- It is possible to set up an exchange in one language and later change the language. Please consult the AlphaPro User Guide for details.
The Voice Messages
The voice messages are provided by the optional ASVP board. The voice messages are:
- Absence messages (77x-messages)
- Voice mail messages (66x-messages)
- Alarm messages
- Help messages
Each ASVP board has messages in one language. When you order the board, specify the language you want from the following options:
| Language | 0rder number: |
| Norwegian | 100 9304 001 |
| Finnish | 100 9304 002 |
| Danish | 100 9304 003 |
| German | 100 9304 004 |
| British | 100 9304 005 |
| French | 100 9304 006 |
| Swedish | 100 9304 011 |
Additional Information
- STENTO delivers voice alarm messages in any language on special request.
It is also possible for you to customize your own alarm messages for the ASVP-board, using the AlphaVoc tool.
The AlphaPro Programming Tool
The AlphaPro programming software itself is supplied in four languages, English, German, French and Norwegian. All these language options are included in the AlphaPro program. During start-up for the program, you choose the language that you want to use for the programming interface.
Additional Information
- The language version for the Windows program that you run on your PC may have some influence on the user interface for AlphaPro.