Physical number 5 and 6 (AlphaCom E7)

In the AlphaCVom E7 the physical numbers 5 and 6 on the first ASLT line board are enabled for program distribution by default.

• To set physical number 5 and/or 6 to be used as program distribution inputs on line c-d when an ASLT board is placed in board pos. 1:

• The jumpers P5 and P6 are set to pos 2-3.
• The potmeters P5 and P6 are used to adjust the input level.

• To set physical number 5 and/or 6 to be used as normal subscriber ports:

• Set jumpers 5 and 6 to pos 1-2
• In AlphaPro, select Exchange & System -> Boards
• Change the port setting from ‘Audio program feed’ to ‘Default’
• Reset the exchange