Physical number 5 and 6 (AlphaCom E7)

In the AlphaCom E7 the physical numbers 5 and 6 on the first ASLT line board are enabled for program distribution by default.

AlphaCom E7 backplane

Set physical number 5 and 6 to "Default"

• To set physical number 5 and/or 6 to be used as normal subscriber ports:

• Set jumpers P5 and/or P6 to position 1-2. There are five jumpers for P5, and five jumpers for P6. P5 is for physical port 5, and P6 is for physical number 6.
• In AlphaPro, select Exchange & System -> Boards
• Change the port setting from ‘Audio program feed’ to ‘Default’
• Reset the exchange