Actions

Test report Ascom IP-Dect

From Zenitel Wiki

Revision as of 14:00, 25 September 2007 by Asle (talk) (System Configuration)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This Test Report describes the interoperability tests between Ascom IP-Dect and AlphaCom E


Test report summary

  • No errors were found
  • Caller id: Missing name in intercom display when receiving calls from Dect. The number is shown, but not the name.

General

System Configuration

  • 2 x AlphaCom E26 with AMC ver 10.22
  • Ascom IPBS1 SIP Base Station ver 2.0.12, with two DECT handsets type 9D24 MKII, sw 3.26

The Dect handsets register to the SIP registrar node in AlphaCom 10.5.101.31. SIP phone licenses (not SIP Trunk licenses) are required for the handsets. The two AlphCom E’s are interconnected in AlphaNet.

Test configuration


Tests

Calls from DECT phones

  • to Intercom stations: OK
    • Caller ID in intercom: Number only , no name
    • Door Opening (6) from DECT: OK
    • Off-hook gives full duplex: OK
  • to ATLB phone: OK
  • to SIP phone X-Lite: OK
  • to All call feature, incl. M-key (#,*) and answer (99): OK
  • to Intercom in another node (area code and global number): OK
  • to IP Station in another node: OK
  • to SIP phone in other node: OK
  • Call to busy intercom gives Camp On Busy: OK
  • Call to intercom in private mode: OK
  • Participate in Duplex Conference: OK

Calls to DECT phones

  • from Intercom stations: OK
    • Caller ID in DECT phone: OK (Name and number)
    • Door Opening (6) from DECT: OK
    • Off-hook gives full duplex: OK
  • from ATLB phone: OK
  • from SIP phone X-Lite: OK
  • from Intercom in another node: OK
  • from IP Station in another node: OK
  • from SIP phone in other node: OK
  • Call to busy DECT phone gives Camp On Busy: OK
  • via intercom which has call forward (71) to DECT: OK