Auto Attendant and Event trigg on dialing digits
From Zenitel Wiki
| Feature: | Event Trigger on digit dialling and Auto Attendant with DAK activation. |
| Default directory number: | 9545 |
| Feature number: | 105 |
| Parameter 1: | 0 = The dialed digit is shown in the display 1 = The display is not updated. Display text can be customized by using $DSPL (to indicate ‘left’, ‘up’ etc) |
| Parameter 2: | 0 = No voice message 1 -> 999 Play voice message with given message individ and Message Group 11. Filename "svp_011_001.wav" -> "svp_011_999.wav". |
| Parameter 3: | 0 = No related DAK "sequence" station 1 -> 552 Physical station where DAK sequences to be activate on initiator station are programmed. |
| Description: | This is actually the Event trigg on dialing digits feature, with extensions based on programming param 2 and param 3
Procedure: Dial 9545 + digits. The digits are reported to the Event Handler, event type 25, with subevent equal to the dialed digit (digit = 0 - 9, M-key = 10) The Dual Display navigation keys are reported as sub events 20,21,22 and 23 <br\> Auto Attendant <br\> When used as Auto Attendant with related DAK station a digit pressed will cancel the voice message and feature 105. <br\> The DAK sequence number matching the digit dialled (0 = DAK 10) will be activated on the initiator station. <br\> If no digit is pressed the search sequence 1 will be activated after the time out defined (default 5 sec.): 89 &000862 .ex_profile.timeouts.auto_att_search = 50 |
Autoloaded directory numbers
| Dirno | DisplayText | Feature | Parm1 | Parm2 | Parm3 | Description |
|---|---|---|---|---|---|---|
| 9545 | Digit Event | 105 | 0 | 0 | 0 | Event trigger without voice menu. |
| 9550 | AutoAttendant | 105 | 0 | 1 | 500 | AutoAttendant with customer voice menu 1 (8181). AutoAttendant "digit" actions must be programmed in DAK table of physical station 500 |