Character escape codes

Escape sequences use an escape character to change the meaning of the characters which follow it. In the Event Handler backslash (\) is used as escape character. Escape sequences might be used in the EDO command to generate non-printable ASCII characters.

Some frequently used escape sequences:

\r = Carriage Return
\n = Line Feed
\t = Tab 
\xhh = hh is any ASCII value in HEX

Escape sequences:

Char	Escape sequence	Result	Hex	Description
,	\,	,	2C	Comma
(	\(	(	28	Opening parenthese
)	\)	)	29	Closing parenthese
"	\"	"	22	Double quote
;	\;	;	3B	Semicolon
\	\\	\	5C	Backslash
%	\%	%	25	Percent
TAB	\t	TAB	09	ASCII TAB (Horisontal tab)
SP	\s	SP	20	Space
CR	\r	CR	0D	Carriage return
LF	\n	LF	0A	Line feed
BEL	\a	BEL	07	Bell (Alert)
BS	\b	BS	08	Backspace
NUL	\0	NUL	00	ASCII NUL
	\xhh	\#hh		'hh' is the ASCII character code as 2 hex digits. Note that you must use 2 digits.
	\l		80	Extended NUL ('\x80')
	\q			to quote next character in string (if not parameter or end of string)

By using the escape sequence '\xhh' all sorts of ASCII characters can be sent on the EDO port.

Example: CR (Carriage Return), which has the hexadecimal value 0D, can be generated by any of the following escape sequences:

\r
\x0D