Actions

Low level hardware analyze (not for beginners!)

From Zenitel Wiki

Revision as of 10:46, 4 April 2008 by Aksel (talk) (New page: === Fault finding on broken hardware === This checks can be preformed if the basic operation of the AMC card is still OK. <br\> First step is to disable the hardware watchdog. If the Alph...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Fault finding on broken hardware

This checks can be preformed if the basic operation of the AMC card is still OK. <br\> First step is to disable the hardware watchdog. If the AlphaCom software is not able to start then the hardware watchdog will continiously reset the card thus AlphaWeb is unavailable.

  • If the cards IP address is unknown cold boot the card
  • Try AlphaWeb login, if success do an alphasys upgrade in case some files is corrupted.
  • If still not working do the hardware check listed bellow.

If no AlphaWeb/telnet available enable the Linux console dipswitch and use the serial port for further tests.


The following test are done from telnet bash.

MBI test

SBI test

DSP check

Retrieved from "https://wiki.zenitel.com/w/index.php?title=Low_level_hardware_analyze_(not_for_beginners!)&oldid=68119"