Billing Installation Guide

This AlphaCom feature is under development and is not yet released!

If you are running on the new file system (AMC Board Support Package Version 10.00), then you can just upgrade with the billing package 1.00 (alpha_billing_01_00.tbz2).
To install a new file system on the Alphacom, follow the instructions below:

1. Upgrade the AMC to version 10.52. In order to upgrade to AMC10.52, AMC10.51 must be installed first.

2. Install the "[Flash Image Upgrade]" application on your computer (Requires .NET Framework 3.0)

3. Copy the image file "alpha_uimage_20_billing.bin" (or desired image) to the "ServerRoot" catalogue selected while installing the program (default: C:\Program Files\STENTOFON\AlphaImageUpgrade\ServerRoot)

4. Install the new image file according to the Flash Image Update Procedure.

5. If it exists a newer Billing package version that you want to install, do this before configuring the billing system. (alpha_billing_01_10.tbz2 is the latest release by 01.03.2009)

6. Insert a license key with desired SIP Trunk Lines

7. Enable the Billing Node Exchange under "Exchange & System -> NetRouting -> General Settings -> Billing Node"

8. Send Changes, and reset from AlphaPro to update database configuration in the Billing Web interface.