Emergency group call with acknowledge

Configuration

DAK leds

The CRM IV leds are configured from the Event Handler in AlphaPro. The leds are controlled by the IND command. Go to Users & Stations, select the CRM IV in the list box, and press Events. Insert an event as described below.

Call Request received

Event Owner:	The CRM IV station
Event type:	10 - Received mail
Subevent:	N/A
When change to:	ON or OFF
When related to:	All
Action:	IND %1.phy %1.dak(I%2.dir) 1 3

This will turn on the red led, flashing fast, in the assosiated DAK key when a Call Request is received.

Outgoing Conversation

Event Owner:	The CRM IV station
Event type:	08 - Conversation - Outgoing
Subevent:	N/A
When change to:	ON or OFF
When related to:	All
Action:	IND %1.phy %1.dak(I%2.dir) 2 1

This will turn on the green led in the assosiated DAK key when an outgoing call is made.

Incoming Conversation

Insert a new event with the following parameters:

Event Owner:	The CRM IV station
Event type:	07 - Conversation - Incoming
Subevent:	N/A
When change to:	ON or OFF
When related to:	All
Action:	IND %1.phy %1.dak(I%2.dir) 2 1

This will turn on the green led in the assosiated DAK key when an incoming call is received.

Buzzer

Priority Mail in Idle

Insert a new event with the following parameters:

Event Owner:	The CRM IV station
Event type:	12 - Priority Mail in Idle
Subevent:	N/A
When change to:	ON or OFF
When related to:	All
Action:	IND %1.phy 1023 1 2

This will turn on the internal buzzer when a call request is received. The buzzer will be silent during conversartion.