Mooring Conference
From Zenitel Wiki
Requirements:
- Everybody shall hear the Active User
- When a user presses the M-key he will become the Active User. Active User doesn't have to keep the M-key pressed while talking
- The Bridge shall be able to talk into the conference by pressing the M-key. When the M-key is released the Active User shall continue to talk without pressing the M-key
- When next user presses M-key, he shal become the Active User
- The Bridge shall from the DAK panel be able to select who should be the Active User
- The DAK panel shall indicate on LED's who is participating in the conference, and who is Active User.
- The Bridge shall be able to disconnect the confrence by pressing a DAK key
- Each user shall be able to disconnect from the conference by dialing a code, e.g. 8200
- It shall be possible to integrate a mobile radio system. The radio shall be able to talk into the conference when squelsh signal is present
In AlphaPro, Exchange & System -> Events, insert a new event with the following parameters:
Event Owner: | A station or an UDP group |
Event type: | 31 - M-key |
Subevent: | 1 (M key status when station is idle) |
When change to: | ON (M key pressed) |
When related to: | (not used) |
Action: | $MAILQ_NAVIG L%1.dir 8 |