Video Configuration (Zenitel Connect Pro)

Introduction

Video settings for a Zenitel device with camera are done from the Zenitel Connect Pro web interface. From the Devices and Connections section, select Configuration. Select one or several devices to configure, the click the Video settings .

Video Settings

Video settings

RTSP H.264

The following presets can be made for the RTSP H.264 stream:

• Resolution
  • 1440x1080
  • 960x720
  • 640x480
  • 320x240
• Frames per second - in a range 5-30
• Bitrate in kps
• 7000
• 5000
• 2500
• 1500 - default setting
• 500
• 300
• 128

The GOV Length is fixed to 25.

SIP H.264

The SIP video settings are used during a SIP video call, to display the video on the screen which is part of an operator telephone. The following presets can be made for the SIP H.264 stream:

• Resolution
  • 1440x1080
  • 960x720
  • 640x480
  • 320x240
• Frames per second - in a range 5-30
• Bitrate in kps
• 7000
• 5000
• 2500
• 1500 - default setting
• 500
• 300
• 128

The GOV Length is fixed to 25.

HTTP MJPG

The MJPG video settings are fixed:

• Resolution: 480p
• Frames per second: 15

Basic authentication can be enabled by setting HTTP MJPEG Authentication.

General settings

The following can be set on a scale 0 to 255, with 128 as default.

• Brightness
• Saturation
• Contrast

Picture placement

The sensor is slightly larger as the number of pixels which will be shown as part of a video stream. This gives the possibility for zoom, pan and tilt:

• Zoom
  • Default 1
  • Range: 0,5 - 2
• Horizontal Zoom Offset
  • Default 0
  • Range -100 - +100
• Vertical Zoom Offset
  • Default 0
  • Range -100 - +100

It is also possible to rotate the picture:

• Rotation
  • Default 0 - no rotation
  • 1: rotation 90 degrees
  • 2: rotation 180 degrees
  • 3: rotation 270 degrees