Difference between revisions of "2-3c. SIP trunk with MP114 (practice)"

Revision as of 13:23, 28 October 2015

System configuration

Call to external phone

By dial 0 + phone number you should be able to place a external phone call via the MP114 gateway

@@ Line 2: / Line 2: @@
 <br style="clear:both;" />
-'''Call buttons:'''
+'''Call to external phone'''
-* Pressing the call button at the Entrance or at the SOS Point should generate a '''Call Request''' (623 + 101) to the Control Room.
+* By dial 0 + phone number you should be able to place a external phone call via the MP114 gateway
-'''CCTV Control:'''
-*When a Call Request (= mail) is received at the Control Room, the AlphaCom should send ASCII text on the EDO port 1 to the CCTV system, telling which camera to connect to which monitor.
-* The EDO output should be "C1M1" when station 107 is calling, and "C2M1" when station 108 is calling.
-* The AlphaCom should be set as a "TCP Server", and TCP port number 4005 should be used for the communication (Hint: Remember to define the port in "Filters" setting).
-* Use the software "PuTTY" to verify that the correct data is being transmitted from the AlphaCom (In PuTTY use the Connection type = "Raw").
 <br><br><br><br>