APWR Power supply
From Zenitel Wiki
Features
- Made for AlphaCom 80+, AlphaCom 138, AlphaCom E20 and AlphaCom E26
- Provides +5 V, +15 V, +24 V, and +32 V
- Universal voltage input range from 90 to 270 VAC
- Each power supply serves 102 standard stations
- Can be connected in parallel for load sharing and redundancy
- Potential-free alarm output to warn of power failure
- The power supply shuts down if one voltage fails for protection against overheating
- Power factor correction for efficient energy use
- Over voltage and short circuit protected
- Plug connector for DC outputs - no screws
- International safety approvals
- LED indicator per output voltage and fault
- Built-in cooling fan
Description
The APWR power supply has four DC outputs delivering the desired voltages for AlphaCom and AlphaCom E exchanges. The power supply is able to supply a STENTOFON AlphaCom exchange equipped with maximum 17 ASLT subscriber cards, which is a fully equipped E20 module. In an E26 exchange, two power supplies are required to supply the complete module; a third can be installed for redundancy.
The power supply is easy to install and connect due to the use of Universal AMP Mate’nLock type output connectors.