Actions

Difference between revisions of "ATLB-12 - AlphaCom Telephone Line Board"

From Zenitel Wiki

(Features)
 
(45 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Image:9104 RS.jpg|thumb|250px]]
+
{{obsolete}}
 
+
{{A}}[[Image:1009104000.PNG|thumb|250px|ATLB-12]]
==Features==
+
The ATLB-12 line board is used for connection of 2-wire DTMF telephones to the AlphaCom server.
 +
==Highlights==
 
* High capacity line card for analogue telephones supporting 12 subscribers lines
 
* High capacity line card for analogue telephones supporting 12 subscribers lines
 
* Supports all ACM telephone features
 
* Supports all ACM telephone features
Line 9: Line 10:
 
* Board hot plug-in
 
* Board hot plug-in
  
==Description==
+
==Connection material==
The ATLB-12 card is a high capacity analogue telephone line card supporting 12 subscriber lines. The subscribers have access to all STENTOFON AlphaCom telephone features.  
+
* In AlphaCom XE20/XE26 there are several options:
 
+
** [[Filter and connection card ASLT and ATLB|Filter and connection card ASLT and ATLB - RJ45 connectors (1009501041)]]
A [[Hot-line Dialing|hot-line function]] is available for connection of telephones without dial buttons. When the handset is lifted, a preprogrammed number is dialed. This can be a call to another subscriber or activation of a function in the exchange.
+
** [[ASLT Filter Board 1.5M|ASLT Filter Board 1.5M (1009501011)]] and [[Subscriber Connection Board|Subscriber Connection Board - Krone connectors (1009930200)]]
The board provides 6 configurable remote control outputs for interfacing of external equipment such as strobe lights, PA control signals and more.
+
** [[ASLT Filter Board 3M|ASLT Filter Board 3M (1009501014)]] and [[Subscriber Connection Board|Subscriber Connection Board  - Krone connectors (1009930200)]]
 
+
** [[ASLT Filter Board 1.5M|ASLT Filter Board 1.5M (1009501011)]] and [[Line Connection Module|Line Connection Module ( 1009950100)]]
The card can be inserted in position 1-6 in the AlphaCom E7 exchange, and position 1-23 in the AlphaCom E20 and E26 exchanges. In AlphaCom E20 and E26 exchanges, the board can be plugged in or out while the exchange is running using the board [[Hot-plug|hot-swap function]].
+
** [[ASLT Filter Board 3M|ASLT Filter Board 3M (1009501014)]] and [[Line Connection Module|Line Connection Module ( 1009950100)]]
  
== Connection material ==
+
* AlphaCom XE7:
* AlphaCom E20/E26: [[Filter and connection card ASLT and ATLB]]
+
** [[Connection Kit ASLT/AGA/AE1/ATLB]]
* AlphaCom E7: [[Connection Kit ASLT/AGA/AE1/ATLB]]
 
  
== Physical ports ==
+
==Physical ports==
 
The ATLB-12 provides 12 telephone lines. The 6 first telephone lines get the physical number according to the physical slot the ATLB-12 is but into. The 6 last telephone lines have an offset of 276 to 6 first physical numbers.
 
The ATLB-12 provides 12 telephone lines. The 6 first telephone lines get the physical number according to the physical slot the ATLB-12 is but into. The 6 last telephone lines have an offset of 276 to 6 first physical numbers.
  
Line 34: Line 34:
 
They are placed on the board for future use only.
 
They are placed on the board for future use only.
  
== Additional notes ==
+
==Software Requirement==
* Minimum software requirement: AMC 10.60
+
Minimum software requirement in AlphaCom: AMC 11.2.3.9
* The ATLB-12 does not support line monitoring
+
 
 +
==Line Monitoring==
 +
The ATLB-12 must be equipped with special software (05.51 or later) in order to support line monitoring. Note that when using ATLB-12 with line monitoring, there can be maximum 15 x ATLB-12 boards in one AlphaCom XE20 or XE26 module. In addition there can be 2 x ASLT boards and 1 x AGA board. For the line monitoring to work, the line must be terminated with an 8k2 resistor.
  
==Specifications==
+
As the ATLB-12 software cannot be updated in the field, this must be done at the factory before the board is shipped. Please contact alphasupport@zenitel.com if line monitoring is required.
  
{| border="1" align=left
+
==Related articles==
|-
+
* [[Release Notes ATLB12]]
!width="100pt"|Order Number:
+
* [[Force analog phone to go on-hook by tone]]
!width="100pt"|1009104000
+
* [[ATLB stations R-key use]]
|-
 
|Interface type || FXS
 
|-
 
|Signalling || DTMF
 
|-
 
|FXS loop resistance || 600 Ohm
 
|-
 
|On hook voltage || -42V
 
|-
 
|Ring voltage || 50Vrms
 
|-
 
|Ring frequency || 25 Hz
 
|-
 
|Frequency range|| 300-3400 Hz
 
|-
 
|Crosstalk at 1 kHz: || <- 75 dB
 
|-
 
|S/N ratio (conversation) || 45 dB
 
|-
 
|Capacity || 12 subscribers lines <br/> Up to 3 telephones per line
 
|-
 
|Duplex scanner || 2
 
|-
 
|Remote control outputs: || 6 (5V 2.2 kOhm)
 
|-
 
|Cable type || Screened, 1 twisted pair, 0.5 mm2
 
|-
 
|Distortion: || <2%
 
|-
 
|Line voltage || -48V
 
|-
 
|Dimensions (WxHxD) || 10mm x 230mm x 263mm <br\> 0.39"x 8.97"x 10.26" <br\> Double Extended Europe Format
 
|}
 
<br style="clear:both;" />
 
  
 +
== Additional information ==
 +
* [http://www.zenitel.com/product/atlb-12 Additional Documentation on Zenitel.com]
  
  
[[Category:Hardware]]
+
[[Category:Discontinued Servers]]
[[Category:Feature boards]]
 

Latest revision as of 15:30, 14 October 2019

Obsolete icon This product is discontinued!


AlphaCom icon 300px.png
ATLB-12

The ATLB-12 line board is used for connection of 2-wire DTMF telephones to the AlphaCom server.

Highlights

  • High capacity line card for analogue telephones supporting 12 subscribers lines
  • Supports all ACM telephone features
  • Supports hotline calling and DTMF dialing
  • Each board supports 6 programmable remote outputs
  • Includes voice switching circuits for two loudspeaking conversations
  • Board hot plug-in

Connection material

Physical ports

The ATLB-12 provides 12 telephone lines. The 6 first telephone lines get the physical number according to the physical slot the ATLB-12 is but into. The 6 last telephone lines have an offset of 276 to 6 first physical numbers.

Example:

  • ATLB-12 installed in slot 1 is using physical numbers 1-6 and 277-282.
  • ATLB-12 installed in slot 2 is using physical numbers 7-12 and 283-288.
  • ATLB-12 installed in slot 3 is using physical numbers 13-18 and 289-294.
  • Etc.

Switches

The 3 DIP switches located on the ATLB-12 card are not relevant for the board’s performance since they are not implemented for use yet. They are placed on the board for future use only.

Software Requirement

Minimum software requirement in AlphaCom: AMC 11.2.3.9

Line Monitoring

The ATLB-12 must be equipped with special software (05.51 or later) in order to support line monitoring. Note that when using ATLB-12 with line monitoring, there can be maximum 15 x ATLB-12 boards in one AlphaCom XE20 or XE26 module. In addition there can be 2 x ASLT boards and 1 x AGA board. For the line monitoring to work, the line must be terminated with an 8k2 resistor.

As the ATLB-12 software cannot be updated in the field, this must be done at the factory before the board is shipped. Please contact alphasupport@zenitel.com if line monitoring is required.

Related articles

Additional information