Actions

Difference between revisions of "ATLB-12 - AlphaCom Telephone Line Board"

From Zenitel Wiki

(Connection material)
 
(15 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Image:1009104000.PNG|thumb|250px|ATLB-12]]
+
{{obsolete}}
 
+
{{A}}[[Image:1009104000.PNG|thumb|250px|ATLB-12]]
===<u>Highlights</u>===
+
The ATLB-12 line board is used for connection of 2-wire DTMF telephones to the AlphaCom server.
 +
==Highlights==
 
* High capacity line card for analogue telephones supporting 12 subscribers lines
 
* High capacity line card for analogue telephones supporting 12 subscribers lines
 
* Supports all ACM telephone features
 
* Supports all ACM telephone features
Line 9: Line 10:
 
* Board hot plug-in
 
* Board hot plug-in
  
===<u>[http://www.zenitel.com/product/atlb-12 Additional Documentation on Zenitel.com]</u>===
+
==Connection material==
 +
* In AlphaCom XE20/XE26 there are several options:
 +
** [[Filter and connection card ASLT and ATLB|Filter and connection card ASLT and ATLB - RJ45 connectors (1009501041)]]
 +
** [[ASLT Filter Board 1.5M|ASLT Filter Board 1.5M (1009501011)]] and [[Subscriber Connection Board|Subscriber Connection Board - Krone connectors (1009930200)]]
 +
** [[ASLT Filter Board 3M|ASLT Filter Board 3M (1009501014)]] and [[Subscriber Connection Board|Subscriber Connection Board  - Krone connectors (1009930200)]]
 +
** [[ASLT Filter Board 1.5M|ASLT Filter Board 1.5M (1009501011)]] and [[Line Connection Module|Line Connection Module ( 1009950100)]]
 +
** [[ASLT Filter Board 3M|ASLT Filter Board 3M (1009501014)]] and [[Line Connection Module|Line Connection Module ( 1009950100)]]
  
===<u>Connection material</u>===
+
* AlphaCom XE7:
* AlphaCom XE20/XE26:  
+
** [[Connection Kit ASLT/AGA/AE1/ATLB]]
** [[ASLT Filter Board 1.5M]] and [[Subscriber Connection Board]]
 
** [[Filter and connection card ASLT and ATLB|Filter and connection card ASLT and ATLB (1009501041)]]
 
* AlphaCom XE7: [[Connection Kit ASLT/AGA/AE1/ATLB]]
 
  
===<u>Physical ports</u>===
+
==Physical ports==
 
The ATLB-12 provides 12 telephone lines. The 6 first telephone lines get the physical number according to the physical slot the ATLB-12 is but into. The 6 last telephone lines have an offset of 276 to 6 first physical numbers.
 
The ATLB-12 provides 12 telephone lines. The 6 first telephone lines get the physical number according to the physical slot the ATLB-12 is but into. The 6 last telephone lines have an offset of 276 to 6 first physical numbers.
  
Line 26: Line 30:
 
* Etc.
 
* Etc.
  
===<u>Switches</u>===
+
==Switches==
 
The 3 DIP switches located on the ATLB-12 card are not relevant for the board’s performance since they are not implemented for use yet.
 
The 3 DIP switches located on the ATLB-12 card are not relevant for the board’s performance since they are not implemented for use yet.
 
They are placed on the board for future use only.
 
They are placed on the board for future use only.
  
===<u>Software Requirement</u>===
+
==Software Requirement==
 
Minimum software requirement in AlphaCom: AMC 11.2.3.9
 
Minimum software requirement in AlphaCom: AMC 11.2.3.9
  
===<u>Line Monitoring</u>===
+
==Line Monitoring==
 
The ATLB-12 must be equipped with special software (05.51 or later) in order to support line monitoring. Note that when using ATLB-12 with line monitoring, there can be maximum 15 x ATLB-12 boards in one AlphaCom XE20 or XE26 module. In addition there can be 2 x ASLT boards and 1 x AGA board. For the line monitoring to work, the line must be terminated with an 8k2 resistor.
 
The ATLB-12 must be equipped with special software (05.51 or later) in order to support line monitoring. Note that when using ATLB-12 with line monitoring, there can be maximum 15 x ATLB-12 boards in one AlphaCom XE20 or XE26 module. In addition there can be 2 x ASLT boards and 1 x AGA board. For the line monitoring to work, the line must be terminated with an 8k2 resistor.
  
 
As the ATLB-12 software cannot be updated in the field, this must be done at the factory before the board is shipped. Please contact alphasupport@zenitel.com if line monitoring is required.
 
As the ATLB-12 software cannot be updated in the field, this must be done at the factory before the board is shipped. Please contact alphasupport@zenitel.com if line monitoring is required.
  
 
+
==Related articles==
===<u>Related articles</u>===
 
 
* [[Release Notes ATLB12]]
 
* [[Release Notes ATLB12]]
 
* [[Force analog phone to go on-hook by tone]]
 
* [[Force analog phone to go on-hook by tone]]
 
* [[ATLB stations R-key use]]
 
* [[ATLB stations R-key use]]
  
[[Category:Feature boards]]
+
== Additional information ==
 +
* [http://www.zenitel.com/product/atlb-12 Additional Documentation on Zenitel.com]
 +
 
 +
 
 +
[[Category:Discontinued Servers]]

Latest revision as of 15:30, 14 October 2019

Obsolete icon This product is discontinued!


AlphaCom icon 300px.png
ATLB-12

The ATLB-12 line board is used for connection of 2-wire DTMF telephones to the AlphaCom server.

Highlights

  • High capacity line card for analogue telephones supporting 12 subscribers lines
  • Supports all ACM telephone features
  • Supports hotline calling and DTMF dialing
  • Each board supports 6 programmable remote outputs
  • Includes voice switching circuits for two loudspeaking conversations
  • Board hot plug-in

Connection material

Physical ports

The ATLB-12 provides 12 telephone lines. The 6 first telephone lines get the physical number according to the physical slot the ATLB-12 is but into. The 6 last telephone lines have an offset of 276 to 6 first physical numbers.

Example:

  • ATLB-12 installed in slot 1 is using physical numbers 1-6 and 277-282.
  • ATLB-12 installed in slot 2 is using physical numbers 7-12 and 283-288.
  • ATLB-12 installed in slot 3 is using physical numbers 13-18 and 289-294.
  • Etc.

Switches

The 3 DIP switches located on the ATLB-12 card are not relevant for the board’s performance since they are not implemented for use yet. They are placed on the board for future use only.

Software Requirement

Minimum software requirement in AlphaCom: AMC 11.2.3.9

Line Monitoring

The ATLB-12 must be equipped with special software (05.51 or later) in order to support line monitoring. Note that when using ATLB-12 with line monitoring, there can be maximum 15 x ATLB-12 boards in one AlphaCom XE20 or XE26 module. In addition there can be 2 x ASLT boards and 1 x AGA board. For the line monitoring to work, the line must be terminated with an 8k2 resistor.

As the ATLB-12 software cannot be updated in the field, this must be done at the factory before the board is shipped. Please contact alphasupport@zenitel.com if line monitoring is required.

Related articles

Additional information