Difference between revisions of "AlphaCom 12.05 - Release Notes"
From Zenitel Wiki
(→Abstract) |
|||
| Line 4: | Line 4: | ||
'''Software in production''': AMC 11.2.3.10<br> | '''Software in production''': AMC 11.2.3.10<br> | ||
| − | '''Note''': For each software version the NVRAM version is listed. If the NVRAM version is different, the AlphaCom InterCom configuration will get default configuration, and then you must do a SendAll from AlphaPro to restore the configuration. All AlphaWeb configuration will be kept. | + | '''Note''': For each software version the NVRAM version is listed. |
| + | If the NVRAM version is different, the AlphaCom InterCom configuration will get default configuration, and then you must do a SendAll from AlphaPro to restore the configuration. All AlphaWeb configuration will be kept. | ||
== Release info == | == Release info == | ||
Revision as of 15:12, 20 March 2018
Abstract
This article provides the release notes for AlphaSys 12.5 with incremental bug fix release.
Software in production: AMC 11.2.3.10
Note: For each software version the NVRAM version is listed. If the NVRAM version is different, the AlphaCom InterCom configuration will get default configuration, and then you must do a SendAll from AlphaPro to restore the configuration. All AlphaWeb configuration will be kept.
Release info
Name: AlphaPro
Description: AlphaPro is the programming tool for the AlphaCom server
Version: 11.7.2.0
Date: 20.03.2018
Status: Limited Availability
- NOTE 1 : This is not an upgrade to v. 11.6.x.x versions. It should not be installed in same location as older AlphaPro versions.
- NOTE 2: Since AlphaPro version 11.5.x.x there is no support for serial communication which is needed to configure AMC9. For AMC9 and mixed networks AlphaPro 11.2.x.x must be used!