Actions

Difference between revisions of "AlphaCom E7"

From Zenitel Wiki

Line 50: Line 50:
  
 
== Installation ==
 
== Installation ==
[[image:AC E7 Installation.jpg|left|thumb|100px|]]
+
[[image:AC E7 Installation.jpg|thumb|100px|]]
 +
The cabinet can be wall or shelf mounted or mounted in a 19” rack.
 +
It has room for installation of one AMC-IP processor board and up
 +
to 6 feature boards. The exchange also includes a power board
 +
and a cooling fan.
 +
 
 +
* All cables are terminated to connectors on the backplane.
 +
* The two-pair star wired intercom cables are connected using pluggable screw connectors.
 +
* Two RJ45 Ethernet terminals are used for IP LAN, WAN, internet and AlphaNet IP communication.
 +
* The serial ports with RS232 and RS422/485 interface are used for interface to equipment using these protocols.
 +
* The two NO switches on the RCI connectors can execute programmable functions.
 
[[Category:AlphaCom E System]]
 
[[Category:AlphaCom E System]]

Revision as of 09:46, 26 June 2007

AlphaCom E7

Features

  • Next generation multiservice platform with integrated media processing engine, packet processing engine, HW encryption and storage module
  • Made for critical communication and security solutions
  • Embedded real time Linux operating system
  • Best of both worlds – supports a mix of IP and traditional services within the same node
  • Backward compatible
  • SIP interoperability with VoIP systems and equipment
  • Wide range of open interfaces
  • Superb audio quality in all environments
  • New services through Web i.e. remote programming
  • Networking capabilities to extend your solution geographically

Description

The AlphaCom E combines the best of the present advanced AlphaCom system with the latest IP, Linux and embedded networking technologies. When entering the IP world, no compromise has been made. The AlphaCom E provides the complete set of existing services, quality, reliability and security characteristics for which AlphaCom has always been recognized.

Some of the special features it brings into the IP domain are wideband (7 kHz) audio, a built-in firewall, integrated Web and SIP server, hardware encryption and low latency switching.

In addition to these important characteristics, a new set of innovative services has been introduced to improve cost efficiency, service capabilities and system operation.

The cabinet has room for installation of 7 circuit boards, one AMCIP processor board and up to 6 feature boards. The exchange also includes a power board and a cooling fan.

Several exchanges can be interconnected on AlphaNet over IP, as well as traditional methods, both locally and worldwide. All communication and services are available throughout the entire network.

The AlphaCom E-series includes extended integration of different kinds of communication and alarm systems, access control, CCTV, public address, public telephones and a variety of features and solutions that can be added when desired. It is easy to interface to 3rd party systems to create special applications.

The new technology allows remote programming, logging and maintenance via AlphaPro, Syslog and standard web browsers.

Installation

AC E7 Installation.jpg

The cabinet can be wall or shelf mounted or mounted in a 19” rack. It has room for installation of one AMC-IP processor board and up to 6 feature boards. The exchange also includes a power board and a cooling fan.

  • All cables are terminated to connectors on the backplane.
  • The two-pair star wired intercom cables are connected using pluggable screw connectors.
  • Two RJ45 Ethernet terminals are used for IP LAN, WAN, internet and AlphaNet IP communication.
  • The serial ports with RS232 and RS422/485 interface are used for interface to equipment using these protocols.
  • The two NO switches on the RCI connectors can execute programmable functions.