Difference between revisions of "Billing Installation Guide"

Latest revision as of 16:07, 13 March 2018

Billing version 2 is only supported on Alphacom XE platform and requires the board support package version 30.00 of the AMC IP Card.

Billing web Status page

If you already are running the APKG package alpha-sys-11.1.3.1.apkg or later on the new AMC IP Card, billing can be activated by inserting a new license included billing trunks.

For new purchased AMC IP Card, please proceed with steps explained:

Steps in short:

Perform a "GET ALL" with the minimum version AlphaPro v11.00 from the old AMC IP card
Flash latest image on the AMC IP Card
Insert the new license including billing
Install the latest APKG package
Restore the AlphaPro database
Enable the Billing Node Exchange in AlphaPro in netrouting for SIP node
Copy the billing version 1 into to filesystem using WinSCP

To install or upgrade from the billing version 1 to 2, follow the instructions below

Perform a "Get ALL" with minimum AlphaPro ver 11.00 to Backup the AlphaPro Database from the old AMC IP Card

AlphaPro

Flash the latest image with support for BSP 30.00 with Alpha Image Upgrade Application

Alpha Image Upgrade application

Install the latest image (Current image: axeu_b3000_a1100300.aimg) with Alpha Image Upgrade Application.
For detailed description: AMC Flash Image update

Install the latest APKG package 11.xx on the Alphacom

Alpha Web

Install the latest image (Currenct package: alpha-sys-11.1.3.1.apkg) with Alpha Image Upgrade Application.

Insert a license key with desired Billing trunks

AlphaWeb license Page

The Billing license packages are:

100 9647 902: 2 simultaneous out-going Billing calls
100 9647 904: 4 simultaneous out-going Billing calls
100 9647 908: 8 simultaneous out-going Billing calls
100 9647 916: 16 simultaneous out-going Billing calls
100 9647 932: 32 simultaneous out-going Billing calls

Copy the billing version 1 database file to location: /opt/backup/db

WinSCP

Copy the “acm.db” or/and "calllogs.db" directory to opt/backup/db from your computer.

Connect to Alphacom by WinSCP using SFTP (port 22):

Default:

Login: root
Password: {root-password}

This tool can be downloaded at

| http://winscp.net/eng/download.php

BillingWeb Database upgrade

Log out/inn on the billing web and enter "UPGRADE" to upgrade the database.

Note!A default Trunk access group will be made, and all the users and extension will be member of that group.

Perform a "Send ALL" with minimum AlphaPro ver 11.00 to restore the AlphaPro Database

AlphaNet Routing

Remember to Enable the billing node in alphaNet routing to SIP Nodes to be controlled by billing. If you want just some of the trunks towards a SIP Node to activate billing on, make a new SIP Node with same address, and attach the trunks against the SIP Node

Note! If you already are running the APKG package alpha-sys-11.1.3.1.apkg or later, billing can be activated only by insert a new license and completeing this last step.

@@ Line 1: / Line 1: @@
-Billing version 2 is only supported on Alphacom XE platform and requires the [[Board_Support_Package | board support package ]] version 30.00 of the AMC IP Card.<br>
+{{A}}
+Billing version 2 is only supported on Alphacom XE platform and requires the [[Board_Support_Package | board support package ]] version 30.00 of the AMC IP Card. <br>
 [[Image:Frontpage_billing.jpg|thumb|right|500px|Billing web Status page]]
+If you already are running the APKG package alpha-sys-11.1.3.1.apkg or later on the [[AMC-IP_-_AlphaCom_Processor_Board_(Black)|new AMC IP Card]], billing can be activated by inserting a new license included billing trunks.
+For new purchased AMC IP Card, please proceed with steps explained:
 Steps in short:
-* Perform a "GET ALL" with the minimum version AlphaPro v11.00
+* Perform a "GET ALL" with the minimum version AlphaPro v11.00 from the old AMC IP card
 * Flash latest image on the AMC IP Card
 * Insert the new license including billing
 * Install the latest APKG package
-* Restore
+* Restore the AlphaPro database
 * Enable the Billing Node Exchange in AlphaPro in netrouting for SIP node
-* Save the billing version 1 into to filesystem using WinSCP
+* Copy the billing version 1 into to filesystem using WinSCP
 <br style="clear:both;" />
-= To install or upgrade from the billing version 1 to 2 or install Billing ver 2, follow the instructions below  =
-== Perform A "Get ALL" with minimum AlphaPro ver 11.00 to Backup the AlphaPro Database before Proceeding ==
+== To install or upgrade from the billing version 1 to 2, follow the instructions below  ==
+<br style="clear:both;" />
+=== Perform a "Get ALL" with minimum AlphaPro ver 11.00 to Backup the AlphaPro Database from the old AMC IP Card ===
+[[Image:Get_all_AlphaPro.png|thumb|350px|AlphaPro]]
+<br style="clear:both;" />
 === Flash the latest image with support for BSP 30.00  with Alpha Image Upgrade Application ===
 [[Image:Flash_image_upgrade_application.jpg|thumb|350px|Alpha Image Upgrade application]]
-Install the latest image (axeu_b3000_a1100300.aimg) with Alpha Image Upgrade Application.<br>
+Install the latest image (Current image: axeu_b3000_a1100300.aimg) with Alpha Image Upgrade Application.<br>
+For detailed description: [[AMC_Flash_Image_update | AMC Flash Image update]]
 <br style="clear:both;" />
-=== Flash the latest image with support for BSP 30.00  with Alpha Image Upgrade Application ===
+=== Install the latest APKG package 11.xx on the Alphacom ===
-[[Image:Flash_image_upgrade_application.jpg|thumb|350px|Interfaces]]
+[[Image:install_APKG_package.jpg|thumb|350px|Alpha Web]]
-Install the latest image (axeu_b3000_a1100300.aimg) with Alpha Image Upgrade Application.<br>
+Install the latest image (Currenct package: alpha-sys-11.1.3.1.apkg) with Alpha Image Upgrade Application.<br>
 <br style="clear:both;" />
+===Insert a license key with desired Billing trunks===
+[[Image:Iicense.jpg|thumb|350px|AlphaWeb license Page]]
+The Billing license packages are:
+*100 9647 902: 2 simultaneous out-going Billing calls
+*100 9647 904: 4 simultaneous out-going Billing calls
+*100 9647 908: 8 simultaneous out-going Billing calls
+*100 9647 916: 16 simultaneous out-going Billing calls
+*100 9647 932: 32 simultaneous out-going Billing calls
+<br style="clear:both;" />
+=== Copy the billing version 1 database file to location: /opt/backup/db ===
+[[Image:WinSCP.jpg|thumb|350px|WinSCP]]
+Copy the “acm.db” or/and "calllogs.db" directory to opt/backup/db from your computer.<br>
+Connect to Alphacom by WinSCP using SFTP (port 22):
+Default:
+*Login:  	root
+*Password: 	{root-password}
+This tool can be downloaded at
+[http://winscp.net/eng/download.php | http://winscp.net/eng/download.php]
+<br style="clear:both;" />
+[[Image:upgradedatabase.jpg|thumb|350px|BillingWeb Database upgrade]]
+Log out/inn on the billing web and enter "UPGRADE" to upgrade the database.
-. Install the "[[AMC_Flash_Image_update|Alphacom Flash Image Upgrade]]" application on your computer (Requires .NET Framework 3.0)
+Note!A default Trunk access group will be made, and all the users and extension will be member of that group.
+<br style="clear:both;" />
-. Copy the image file "alpha_uimage_20_billing.bin" (or desired image) to the "ServerRoot" catalogue selected while installing the program (default: C:\Program Files\STENTOFON\AlphaImageUpgrade\ServerRoot)
-. Install the new image file according to the [[AMC_Flash_Image_update#Image_update_procedure|AMC Flash Image Update Procedure]].
-. If it exists a newer Billing package version that you want to install, do this before configuring the billing system. (alpha_billing_01_10.tbz2 is the latest release by 01.03.2009)
-. Insert a license key with desired SIP Trunk Lines
-. Enable the Billing Node Exchange under "Exchange & System -> NetRouting -> General Settings -> Billing Node"
+=== Perform a "Send ALL" with minimum AlphaPro ver 11.00 to restore the AlphaPro Database ===
+[[Image:Alphanet_netrouting.jpg|thumb|350px|AlphaNet Routing]]
-. Send Changes, and reset from AlphaPro to update database configuration in the Billing Web interface.
+Remember to Enable the billing node in alphaNet routing to SIP Nodes to be controlled by billing.
+If you want just some of the trunks towards a SIP Node to activate billing on, make a new SIP Node with same address, and attach the trunks against the SIP Node
-==Related Articles==
+Note! If you already are running the APKG package alpha-sys-11.1.3.1.apkg or later, billing can be activated only by insert a new license and completeing this last step.
-* [[AMC_Flash_Image_update|AMC Flash Image Update]]
-* [[Board_Support_Package|Board Support Package]]
-* [[AMC-IP_software_upgrade|AMC-IP Software Upgrade]]
 [[Category:Billing]]
+[[Category:AlphaCom - SIP Integration]]