Difference between revisions of "CALL SETUP"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| − | {| border | + | {| border="1" cellspacing="0" cellpadding="3" |
|- | |- | ||
| − | !width="90pt" colspan="2"|CALL_SETUP | + | !style="background:#ffdead;" width="90pt" colspan="2"|CALL_SETUP |
| − | !width="100pt"|0x0008 | + | !style="background:#ffdead;"width="100pt"|0x0008 |
| − | !width="30pt"|8 | + | !style="background:#ffdead;"width="30pt"|8 |
| − | !width="100pt"|AMC 08.20 | + | !style="background:#ffdead;"width="100pt"|AMC 08.20 |
|- | |- | ||
|colspan="2"|'''$CALL L101 L102''' <br\> '''$CALL L101 L102 W32''' <BR\> '''$CALL L101 L102 W64 | |colspan="2"|'''$CALL L101 L102''' <br\> '''$CALL L101 L102 W32''' <BR\> '''$CALL L101 L102 W64 | ||
Revision as of 17:23, 13 June 2007
| CALL_SETUP | 0x0008 | 8 | AMC 08.20 | |
|---|---|---|---|---|
| $CALL L101 L102 <br\> $CALL L101 L102 W32 <BR\> $CALL L101 L102 W64 | Let 101 call 102 <BR\> Let 101 call, ignore if 102 forwards <br\> Let 101 call 102, force both 101 and 102 | |||
$CALL_SETUP sets up a conversation like dialing from a station. Default behavior:
$CONN_REQUEST/$CONN is retained for compatibility only, DPMT_CALL_SETUP is the preferred message now. | ||||
| 1 | NET_OBJ_REF<br\>{ECL_STATION, <BR\> ECL_USER} | A - user or station. | ||
| 2 | NET_OBJ_REF <br\>{ECL_STATION, <BR\> ECL_USER} | B - user or station | ||
| 3 | UINT2<br\>(optional) | Call mode options (default zero)<br\>Call mode options can be the sum of the following:<BR\>
1: Return CONN_REFERENCE, STATION_DOWN or STATION_BUSY. Send DISCONNECTED at disconnect (CSF_RETURN_ACK)<BR\> 2: Require CONN_REF_ACK and DISCONNECTED_ACK (CSF_3WAY_ACK)<BR\> 4: Reserved<BR\> 8: Reserved<BR\> 16: Do not disconnect A station if busy (CSF_NOT_FORCE_A)<BR\> 32: Do not follow call forwarding (CSF_NO_FORWARD)<BR\> 64: Transfer call, answer group call (CSF_TRANSFER_CALL) Forces both A and B stations.<BR\> 128: Force call in Open Duplex mode (CSF_OPEN_DUPLEX) (AMC 09.03) | ||
| 4 | UINT1<BR\>(optional) | A-call priority 1 - 4. Zero or omitted means that the NVRAM priority of A station is used | ||
| 5 | UINT1<br\>(optional) | B-call priority 1 - 4. Zero or omitted means that the NVRAM priority of A station is used | ||
| 6 | NET_OBJ_REF<br\>{ECL_STATION}<br\>(optional) | B Station if User B is not at own station. | ||
| Response | CONN_REFERENCE, STATION_DOWN or STATION_BUSY, or none | |||