Actions

Difference between revisions of "CDC STATE"

From Zenitel Wiki

Line 75: Line 75:
 
'''NOTE:''' Parameter #5 will only be added if Sub Event in parameter #3 is of type 8 CHANGE_A_IDENTITY.
 
'''NOTE:''' Parameter #5 will only be added if Sub Event in parameter #3 is of type 8 CHANGE_A_IDENTITY.
  
 
+
<br>
 
[[Category: ACDP messages]]
 
[[Category: ACDP messages]]
 
[[AlphaNet_Data_Protocol#Station_Connect_Operations|Back to AlphaNet message list]]
 
[[AlphaNet_Data_Protocol#Station_Connect_Operations|Back to AlphaNet message list]]

Revision as of 10:06, 17 November 2009

Related to ABSD_Billing

CDC_STATE 0x009E 158 AMC 10.40
Message used for billing control, from AMCD to ABSD <br\>

CDC = Call Detail Control. Response is CDC_CMD.

1 UINT2 Connection Reference for this "dialing" sequence (actually ST_IND of A-station)
2 NET_OBJ_REF A-station (billed station), in NRF_LOCAL_DIRNO format.
3 UINT1 State of billing sequence.

1 START, user has initiated a feature requiring CDC (5 = feature dirno)
2 DIGIT, user has dial a digit (5 = digit netref)
3 ESTABLISHED, (SIP)connection established (200 OK received)
4 ACTIVE, call is still active, will come every 10 second during connection
5 DISCONNECT, CDC sequence ended, ABSD to release call.
6 SPEECH_START, Speech detected by AudioCodes
7 SPEECH_END, Speech detect end by AudioCodes

4 NET_OBJ_REF Netref related to state type, (Feature, B-station or digit)



Modifications to the CDC_STATE Event

The CDC_STATE event sent from AMC to ABSD needs to handle the new A extensions Connection Reference (UINT2) and Directory Number (NET_OBJ_REF).

Propose to add two new Sub Events in parameter #3;

  • 8 CHANGE_A_IDENTITY
  • 9 ACTIVE_SYNC


Propose to add a new parameter #5 of type UINT2 to hold the new A extensions Connection Reference.

The new CDC_STATE event will look like this:

CDC_STATE 0x009E 158 AMC 10.40
Message used for billing control, from AMCD to ABSD <br\>

CDC = Call Detail Control. Response is CDC_CMD.

1 UINT2 Connection Reference for this "dialing" sequence (actually ST_IND of A-station)
2 NET_OBJ_REF A-station (billed station), in NRF_LOCAL_DIRNO format.
3 UINT1 State of billing sequence.

1 START, user has initiated a feature requiring CDC (5 = feature dirno)
2 DIGIT, user has dial a digit (5 = digit netref)
3 ESTABLISHED, (SIP)connection established (200 OK received)
4 ACTIVE, call is still active, will come every 10 second during connection
5 DISCONNECT, CDC sequence ended, ABSD to release call.
6 SPEECH_START, Speech detected by AudioCodes
7 SPEECH_END, Speech detect end by AudioCodes
8 CHANGE_A_IDENTITY, Change A extension, continue Billing sequence
9 ACTIVE_SYNC, first message after CHANGE_A_IDENTITY, synchronize AMC and ABSD with new message header

4 NET_OBJ_REF Netref related to state type, (Feature, B-station or digit)
5 UINT2 Connection Reference for new A station/extension AMC 10.6x


If the CDC_STATE is sent with CHANGE_A_IDENTITY; the parameter #4 will hold the new Directory Number and parameter #5 will hold the new Connection Reference.

NOTE: Parameter #5 will only be added if Sub Event in parameter #3 is of type 8 CHANGE_A_IDENTITY.


Back to AlphaNet message list