Actions

Difference between revisions of "CONN REQUEST"

From Zenitel Wiki

(Removing all content from page)
Line 1: Line 1:
 
+
{| border="1" align=left
 +
|-
 +
!width="90pt" colspan="2"|CONN_REQUEST
 +
!width="100pt"|0x000A
 +
!width="30pt"|10
 +
!width="100pt"|AMC 05.00
 +
|-
 +
|colspan="5"|'''$CONN L101 L102'''
 +
|-
 +
|colspan="5"|$CALL_SETUP sets up a conversation like dialing from a station. Default behavior:
 +
* A station is disconnected if busy
 +
* Call can result in Private ringing, Absent, Busy or Transfer like a ordinary call
 +
* The A station's call priority in NVRAM is used.
 +
* No acknowledge messages are returned
 +
$[[CONN_REQUEST]]/$CONN is retained for compatibility only, DPMT_CALL_SETUP is the preferred message now.
 +
|-
 +
|1||[[NET_OBJ_REF]]<br\>{[[ECL_STATION]], <BR\> [[ECL_USER]]}||colspan="3"|A - user or station.
 +
|-
 +
|2||[[NET_OBJ_REF]] <br\>{[[ECL_STATION]], <BR\> [[ECL_USER]]}||colspan="3"|B - user or station
 +
|-
 +
|3||[[UINT2]]<br\>(optional)||colspan="3"|Call mode options  (default zero)<br\>Call mode options can be the sum of the following:<BR\> 
 +
1: Return [[CONN_REFERENCE]], [[STATION_DOWN]] or [[STATION_BUSY]]. Send [[DISCONNECTED]] at disconnect (CSF_RETURN_ACK)<BR\>
 +
2: Require [[CONN_REF_ACK]] and [[DISCONNECTED_ACK]] (CSF_3WAY_ACK)<BR\>
 +
4: Reserved<BR\>
 +
8: Reserved<BR\>
 +
16: Do not disconnect A station if busy (CSF_NOT_FORCE_A)<BR\>
 +
32: Do not follow call forwarding (CSF_NO_FORWARD)<BR\>     
 +
64: Transfer call, answer group call (CSF_TRANSFER_CALL)  Forces both A and B stations.<BR\>
 +
128: Force call in Open Duplex mode (CSF_OPEN_DUPLEX) (AMC 09.03)
 +
|-
 +
|4||[[UINT1]]<BR\>(optional)||colspan="3"|A-call priority 1 - 4. Zero or omitted means that the NVRAM priority of A station is used
 +
|-
 +
|5||[[UINT1]]<br\>(optional)||colspan="3"|B-call priority 1 - 4. Zero or omitted means that the NVRAM priority of A station is used
 +
|-
 +
|6||[[NET_OBJ_REF]]<br\>{[[ECL_STATION]]}<br\>(optional)||colspan="3"|B Station if User B is not at own station.
 +
|-
 +
|||Response||colspan="3"|[[CONN_REFERENCE]], [[STATION_DOWN]] or [[STATION_BUSY]], or none
 +
|}

Revision as of 13:05, 11 June 2007

CONN_REQUEST 0x000A 10 AMC 05.00
$CONN L101 L102
$CALL_SETUP sets up a conversation like dialing from a station. Default behavior:
  • A station is disconnected if busy
  • Call can result in Private ringing, Absent, Busy or Transfer like a ordinary call
  • The A station's call priority in NVRAM is used.
  • No acknowledge messages are returned

$CONN_REQUEST/$CONN is retained for compatibility only, DPMT_CALL_SETUP is the preferred message now.

1 NET_OBJ_REF<br\>{ECL_STATION, <BR\> ECL_USER} A - user or station.
2 NET_OBJ_REF <br\>{ECL_STATION, <BR\> ECL_USER} B - user or station
3 UINT2<br\>(optional) Call mode options (default zero)<br\>Call mode options can be the sum of the following:<BR\>

1: Return CONN_REFERENCE, STATION_DOWN or STATION_BUSY. Send DISCONNECTED at disconnect (CSF_RETURN_ACK)<BR\> 2: Require CONN_REF_ACK and DISCONNECTED_ACK (CSF_3WAY_ACK)<BR\> 4: Reserved<BR\> 8: Reserved<BR\> 16: Do not disconnect A station if busy (CSF_NOT_FORCE_A)<BR\> 32: Do not follow call forwarding (CSF_NO_FORWARD)<BR\> 64: Transfer call, answer group call (CSF_TRANSFER_CALL) Forces both A and B stations.<BR\> 128: Force call in Open Duplex mode (CSF_OPEN_DUPLEX) (AMC 09.03)

4 UINT1<BR\>(optional) A-call priority 1 - 4. Zero or omitted means that the NVRAM priority of A station is used
5 UINT1<br\>(optional) B-call priority 1 - 4. Zero or omitted means that the NVRAM priority of A station is used
6 NET_OBJ_REF<br\>{ECL_STATION}<br\>(optional) B Station if User B is not at own station.
Response CONN_REFERENCE, STATION_DOWN or STATION_BUSY, or none