Difference between revisions of "Call Requester Mode (Event Type)"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| + | ==Event description== | ||
| + | {| | ||
| + | |- | ||
| + | |width="100pt"|'''Event Owner''': | ||
| + | |width="300pt"|The calling station or an [[UDP]] group | ||
| + | |- | ||
| + | |'''Event type''': || 11 - Call Requester mode | ||
| + | |- | ||
| + | |'''Subevent''': || N/A | ||
| + | |- | ||
| + | |'''When change to ON''': || When the station has made a [[Call Request]] | ||
| + | |- | ||
| + | |'''When change to OFF''': || When Call Requester mode has been left (because the call has been answered, the queue entry is deleted, timeout, or a station key has been pressed) | ||
| + | |- | ||
| + | |'''When related to''': || The queuing station | ||
| + | |- | ||
| + | |} | ||
| + | <br> | ||
| + | |||
==Event description== | ==Event description== | ||
Revision as of 00:21, 6 November 2007
Event description
| Event Owner: | The calling station or an UDP group |
| Event type: | 11 - Call Requester mode |
| Subevent: | N/A |
| When change to ON: | When the station has made a Call Request |
| When change to OFF: | When Call Requester mode has been left (because the call has been answered, the queue entry is deleted, timeout, or a station key has been pressed) |
| When related to: | The queuing station |
Event description
| Event Owner: | the calling station |
|---|---|
| Event type: | 11 - Call Requester Mode |
| Sub-Event: | N/A |
| When Change to ON: | When this station dials a Call Request, which sends a mail to another station's mail queue. The event goes ON when the station has been put into the queue |
| When Change to OFF: | When the queue entry is deleted, pr the station has been used for something |
| When Related to: | the queuing station |
- Additional information:
- - The event is active while the station has voice message/flash/ringing
- Application
- - Additional lamp indication of call (outside cells etc.)