Call Requester Mode (Event Type)
From Zenitel Wiki
Event description
Event Owner: | The calling station or an UDP group |
Event type: | 11 - Call Requester mode |
Subevent: | N/A |
When change to ON: | When the station has made a Call Request |
When change to OFF: | When Call Requester mode has been left (because the call has been answered, the queue entry is deleted, timeout, or a station key has been pressed) |
When related to: | The queuing station |
Event description
Event Owner: | the calling station |
---|---|
Event type: | 11 - Call Requester Mode |
Sub-Event: | N/A |
When Change to ON: | When this station dials a Call Request, which sends a mail to another station's mail queue. The event goes ON when the station has been put into the queue |
When Change to OFF: | When the queue entry is deleted, pr the station has been used for something |
When Related to: | the queuing station |
- Additional information:
- - The event is active while the station has voice message/flash/ringing
- Application
- - Additional lamp indication of call (outside cells etc.)