Difference between revisions of "Calling from a Substation"
From Zenitel Wiki
(New page: == Calling From a Substation == Substations have fewer keys than normal intercom stations. Usually they have no 0-9 dialing keypad but one, two or three call keys, and possibly the M-key ...) |
|||
| Line 7: | Line 7: | ||
* Key no 3 on substation 1000 704400 will not work as it makes use of the ID + LT signal, which is not supported by the AlphaCom exchange. | * Key no 3 on substation 1000 704400 will not work as it makes use of the ID + LT signal, which is not supported by the AlphaCom exchange. | ||
* Keys on other substations modified to use the ID + LT signal will not work with the AlphaCom exchange. | * Keys on other substations modified to use the ID + LT signal will not work with the AlphaCom exchange. | ||
| + | |||
| + | |||
| + | [[Category: AlphaCom features]] | ||
Revision as of 17:56, 27 August 2007
Calling From a Substation
Substations have fewer keys than normal intercom stations. Usually they have no 0-9 dialing keypad but one, two or three call keys, and possibly the M-key and the C-key. The call keys are used for calling predetermined numbers (single-touch keys).
To make a call, just press the appropriate key. Each substation may call up to two freely pre-programmed directory numbers. Substations are useful in a wide range of applications, such as door stations with one key or elevator alarm stations programmed to call or make a Call Request to a control room.
Additional Information
- Key no 3 on substation 1000 704400 will not work as it makes use of the ID + LT signal, which is not supported by the AlphaCom exchange.
- Keys on other substations modified to use the ID + LT signal will not work with the AlphaCom exchange.