Actions

Cisco Call Manager 8 configuration

From Zenitel Wiki

Revision as of 14:31, 13 March 2018 by Asle (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
SIP Icon 300px.png

Software requirement: The SIP intercom must have firmware 02.02.3.1 or later.

Configuring the Cisco Call Manager

Add New Phone

User Management -> End User -> Add New
SIP Intercom Configuration - User Information
  • User ID: 92
  • Password: ******
  • Last Name: Zenitel
  • Press Save
  • Device Association and select your Device
  • Press Save


Add New Phone

SIP Intercom Configuration - Add a New Phone
Device -> Phone -> Add New
  • Phone Type: Third-party SIP Device (Basic)
  • Press Next


SIP Intercom Configuration - Phone Configuration
  • MAC Address: Enter your SIP Intercoms MAC address
  • Description: Zenitel Intercom
  • Device Pool: Zenitel
  • Phone button Template: Third-party SIP Device (Basic)
  • Calling Search Space: DefaultUser
  • Media Resource Group List: AlphaCom_MRGL
  • Owner User ID: 92
  • Device Security Profile: Third-party SIP Device (Basic) - Standard SIP - Non-secure
  • SIP Profile: Standard SIP Profile
  • Digest User: 92
  • Press Save
  • In the upper left corner press ”Line [1] – Add a new DN]


SIP Intercom Configuration - Directory Number Configuration
  • Enter wanted directory number (here 92)
  • Route Partition: AllLines
  • Calling Search Space: defaultUser
  • Press Save
  • Press Reset/Restart


Configuring the Stentofon SIP Intercom

Log on to your SIP Intercom by entering the IP address of the station in your web browser.

SIP Account Settings

Stentofon SIP Intercom Configuration - SIP Account Settings
Station Configuration -> SIP Settings
  • SIP Display Name: Zenitel Intercom
  • SIP ID: 92
  • SIP Domain: Your Ciscos IP Address
  • Registration Method: Parallell is normally used, but if you have additional subscribers in your CUCM cluster you must use serial.
  • Authenitcaion User Name: 92
  • Press Save
  • Press Reboot, and OK.


Call Settings

SIP Intercom Configuration - Call Settings
Station Configuration -> SIP Settings

Here you define how incoming calls to the SIP Intercom is treated. Microphone and Speaker levels are adjustable from here.

Audio Settings

SIP Intercom Configuration - Audio Settings
SIP Configuration -> Audio Settings

Microphone and Speaker levels are adjustable from here.

Speed Dial Settings

Stentofon SIP Intercom Configuration - Direct Access Key Settings
SIP Configuration -> Direct Access Key Settings

Here you define the call pattern of your SIP Intercom.