Difference between revisions of "DISCON ST"

Revision as of 15:58, 11 June 2007

DISCON_ST		0x008E	142
$DISCON_ST L101 2			Disconnect
1	Station to disconnect
2	UINT1<br\>(Optional)	Disconnect tone: <br\> 0: No tone (default) <br\> 1: Disconnection tone <br\> 2: success tone <br\> 3: failure tone
	colspan="3"	COMMAND_RESPONSE is returned. Status = 0 if station already Idle, Status = 1 if some activity was disconnected. Parameter is physical number.<br\> COMMAND_RESPONSE is returned after the disconnection tone (if any).

@@ Line 1: / Line 1: @@
 {| border="1" align=left
 |-
-!width="90pt" colspan="2"|$DISCON_ST L101 2
+!width="90pt" colspan="2"|DISCON_ST
 !width="100pt"|0x008E
 !width="30pt"|142
 !width="100pt"|AMC 08.20
+|-
+|colspan="3"|$DISCON_ST L101 2
+|colspan="2"|Disconnect
 |-
 |1||NET_OBJ-REF<BR\>{ECL_STSTION}|Station to disconnect
@@ Line 10: / Line 13: @@
 |2||[[UINT1]]<br\>(Optional)||colspan="3"|Disconnect tone: <br\> 0: No tone (default) <br\> 1: Disconnection tone <br\> 2: success tone <br\> 3: failure tone
 |-
-|&nbsp;||Response:|colspan="3"| COMMAND_RESPONSE is returned. Status = 0 if station already Idle, Status = 1 if some activity was disconnected. Parameter is physical number.<br\> COMMAND_RESPONSE is returned after the disconnection tone (if any).
+|&nbsp;||Response:|colspan="3"|| COMMAND_RESPONSE is returned. Status = 0 if station already Idle, Status = 1 if some activity was disconnected. Parameter is physical number.<br\> COMMAND_RESPONSE is returned after the disconnection tone (if any).
 |-
 |}