Difference between revisions of "DISCON ST"

Revision as of 16:08, 11 June 2007

DISCON_ST		0x008E
$DISCON_ST L101 2		Disconnect
1	NET_OBJ_REF<BR\>{ECL_STATION}	Station to disconnect
2	UINT1<br\>(Optional)	Disconnect tone: <br\> 0: No tone (default) <br\> 1: Disconnection tone <br\> 2: success tone <br\> 3: failure tone
Response:		COMMAND_RESPONSE is returned. Status = 0 if station already Idle, Status = 1 if some activity was disconnected. Parameter is physical number.<br\> COMMAND_RESPONSE is returned after the disconnection tone (if any).

@@ Line 6: / Line 6: @@
 !width="100pt"|AMC 08.20
 |-
-|colspan="3"|$DISCON_ST L101 2
+|colspan="2"|'''$DISCON_ST L101 2'''
-|colspan="2"|Disconnect
+|colspan="3"|''Disconnect''
 |-
-|1||NET_OBJ-REF<BR\>{ECL_STSTION}|Station to disconnect
+|1||NET_OBJ_REF<BR\>{ECL_STATION}||colspan="3"|Station to disconnect
 |-
 |2||[[UINT1]]<br\>(Optional)||colspan="3"|Disconnect tone: <br\> 0: No tone (default) <br\> 1: Disconnection tone <br\> 2: success tone <br\> 3: failure tone
 |-
-|&nbsp;||Response:|colspan="3"|| COMMAND_RESPONSE is returned. Status = 0 if station already Idle, Status = 1 if some activity was disconnected. Parameter is physical number.<br\> COMMAND_RESPONSE is returned after the disconnection tone (if any).
+|colspan="2" |Response:||colspan="3"| COMMAND_RESPONSE is returned. Status = 0 if station already Idle, Status = 1 if some activity was disconnected. Parameter is physical number.<br\> COMMAND_RESPONSE is returned after the disconnection tone (if any).
 |-
 |}