Actions

Dual Display Station - 1007007000

From Zenitel Wiki

Revision as of 13:23, 15 August 2018 by Asle (talk | contribs) (Dimensional Drawing)
AlphaCom icon 300px.png
DualDisplayFront2.png

The Dual Display Station is an analog intercom station. It is connected to an ASLT line card in an AlphaCom XE7, AlphaCom XE20 or AlphaCom XE26 server using 2 pairs of wires.

Highlights

  • Desktop master station with full access to all features in the VINGTOR-STENTOFON AlphaCom XE exchange
  • The station may use up to 90 Direct Access Keys (DAK) on 9 dynamic DAK pages
  • The dialing keys have letters to be used for search facility in the intercom directory and display text editing
  • The station has 4 dynamic navigation keys for quick access to system menus and directory entries
  • Status information, guidance and menus are shown on a large 4 line graphic display


Requirements

  • The Dual Display is supported from AlphaCom software version 9 and higher


Wiring

The cabling from the AlphaCom server to the intercom station is star wiring. Two twisted pairs of wires are required. The maximum distance depends on the cable diameter:

  • 0.5 mm wires: 1.4 km
  • 0.6 mm wires: 2.0 km
  • 0.9 mm wires: 4.0 km
WiringAnalog7034310.png


Note icon The station cable is not a 1:1 cable!


For details on connection at the AlphaCom server side, see ASLT - AlphaCom Subscriber Line Board


Dimensional Drawing

Side view Rear view

Related articles

Dual Display Configuration

Additional Documentation on Zenitel.com

Gooseneck microphone (optional)