Actions

ECPIR-P

From Zenitel Wiki

AEIPS.png
Exigo call panel (1023200030)

Getting started

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

General configuration:

Station specific configuration for the ECPIR:

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

EBMDR-8-newZ.png 3005020033.PNG 1023533012.png 1023595010.PNG 1023595020.PNG
EBMDR-8 MB-30G PAM1H EMBR-1 EMBR-2

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.11

  • Edge mode is supported from firmware version 5.0
  • SIP (and Pulse) mode is fully supported as from firmware version 4.7

Related Information