Difference between revisions of "ENA2060 Amplifier"
From Zenitel Wiki
ZenitelAus (talk | contribs) (Tag: Visual edit) |
(→Software Upgrade) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 5: | Line 5: | ||
2 different ENA2060 models exist. | 2 different ENA2060 models exist. | ||
| − | * ENA2060-DC1 uses a 110 VDC power source | + | *ENA2060-DC1 uses a 110 VDC power source |
| − | * ENA2060-DC2 uses a 24-48 VDC power source | + | *ENA2060-DC2 uses a 24-48 VDC power source |
==Installation, Mounting and Dimensions== | ==Installation, Mounting and Dimensions== | ||
*[[ENA2060 Amplifier - Mounting and Installation|Mounting and Installation]] | *[[ENA2060 Amplifier - Mounting and Installation|Mounting and Installation]] | ||
| − | *[[ENA2060 | + | *[[ENA2060 Dimensions|Dimensions]] |
==Configuration== | ==Configuration== | ||
| Line 23: | Line 23: | ||
*[[Turbine Software Upgrade|Upgrade using the web interface of the amplifier]] | *[[Turbine Software Upgrade|Upgrade using the web interface of the amplifier]] | ||
| − | *[[ | + | *[[IMT - Discover & Upgrade|Upgrade using the IMT tool]] |
Load Factory Default values: | Load Factory Default values: | ||
Latest revision as of 09:55, 16 August 2022
The ENA2060 Network Amplifier for Rolling Stock incorporates SIP-addressable loudspeaker loops that enable the use of the same software for handling both Passenger Emergency Intercom / Crew Communication and Public Address (PA), as well as the required Train Radio Integration, thus eliminating one entire subsystem from the solution.
This results in a well-integrated system with less complexity and more functionality, while the use of open standards offers freedom of choice when it comes to future upgrades and supply.
2 different ENA2060 models exist.
- ENA2060-DC1 uses a 110 VDC power source
- ENA2060-DC2 uses a 24-48 VDC power source
Contents
Installation, Mounting and Dimensions
Configuration
Software Upgrade
The ENA2060 amplifier is a "Turbine" device, and the software is upgraded in the same way as Turbine Intercom stations.
Load Factory Default values:
- Factory Default values can be restored by shorting pins 7 and 13 in the Multi-Connector during boot and following the directions for TKIS Restore Factory Defaults
- Factory Default values can also be loaded via the web interface of the amplifier, from the Station Administration > Reboot menu