Difference between revisions of "ENA2100 Status LEDs"

Revision as of 14:44, 9 January 2019

The ENA2100-AC Amplifier has status LED indicators in the front panel:

ENA2100 - Status LEDs

Power: Steady green light when the amplifier is powered on
Status: When the amplifier is operational, the LED is flashing green. The LED will be steady lit during the startup sequence
Fault: The yellow fault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See ENA Amplifier - Monitoring. The Fault LED is lit during the startup sequence
Disabled:
VU 1:
VU 2:

@@ Line 1: / Line 1: @@
 {{A}}
-The [[ENA2100-AC Amplifier]] has '''status LED indicators''' in the fron panel:
+The [[ENA2100-AC Amplifier]] has '''status LED indicators''' in the front panel:
 [[File:ENA2100 StatusLED.PNG|thumb|left|500px|ENA2100 - Status LEDs]]
 <br style="clear:both;" />
-When "One Channel mode" is activated, the two loudspeaker channels will play identical audio, and the audio will be in phase. One can then choose to use two separate loudspeaker loops, each with maximum 100W, or one can bridge the two output channels, and use one loudspeaker loop with up to 200W load.
+* '''Power''': Steady green light when the amplifier is powered on
+* '''Status''': When the amplifier is operational, the LED is flashing green. The LED will be steady lit during the startup sequence
+* '''Fault''': The yellow fault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See [[ENA Amplifier - Monitoring.]] The Fault LED is lit during the startup sequence
+* '''Disabled''':
+* '''VU 1''':
+* '''VU 2''':