Difference between revisions of "Filter card AMC-IP"
From Zenitel Wiki
(→Connections) |
(→Connections) |
||
Line 24: | Line 24: | ||
==Connections== | ==Connections== | ||
[[Image:AMC-IP-Connections.PNG]] | [[Image:AMC-IP-Connections.PNG]] | ||
+ | |||
+ | ==Serial Port Connections== | ||
+ | AMC switch S601 – 1 on: | ||
+ | * Serial port 0: AlphaPro | ||
+ | * Serial port 1: Linux Console (115.200 baud, N, 8, 1) | ||
+ | AMC switch S601 – 1 off: | ||
+ | * Serial port 0 and 1 controlled by the AMC (EDO, MPC data, Pager, ACDP etc.) | ||
+ | |||
+ | |||
[[Category:Hardware]] | [[Category:Hardware]] | ||
[[Category:Filter and connection cards]] | [[Category:Filter and connection cards]] |
Revision as of 10:52, 16 March 2009
Description
The AMC-IP Filter Card provides:
- 2 Ethernet Connections:
- 2 x Ethernet Ports (IEEE 802.3)
- Transfer Rates 10 and 100 Mbps
- Autosensing 10/100 or fixed transfer rates
- Auto-MDX eliminating the need of crossover cables
- Serial communications
- One Serial Port RS232
- One Serial Port RS232/422/485
- One USB 1.1 Slave Port (future use)
- For more serial ports an Ethernet to Serial converter should be used
- Several applications that before used serial ports can now use Ethernet ports
- AlphaNet
- MultiModule
- Telephone Interface (SIP Gateway instead of PNCI)
Jumpers
The onboard jumpers selects RS422 or RS485 on Serial Port 1.
Connections
Serial Port Connections
AMC switch S601 – 1 on:
- Serial port 0: AlphaPro
- Serial port 1: Linux Console (115.200 baud, N, 8, 1)
AMC switch S601 – 1 off:
- Serial port 0 and 1 controlled by the AMC (EDO, MPC data, Pager, ACDP etc.)