Actions

Difference between revisions of "Firewall (IP Stations)"

From Zenitel Wiki

 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
{{APS}}
+
{{AEIPS}}
 
All IP Stations have an embedded firewall.  
 
All IP Stations have an embedded firewall.  
  
Line 44: Line 44:
 
{{Note|VoIP port range is configurable from firmware 2.7 (INCA) and 4.7 (Turbine) when the station is in SIP mode.}}
 
{{Note|VoIP port range is configurable from firmware 2.7 (INCA) and 4.7 (Turbine) when the station is in SIP mode.}}
  
 +
[[Category: IC-EDGE Configuration]]
 
[[Category: Pulse - Configuration]]
 
[[Category: Pulse - Configuration]]
 
[[Category: SIP intercom - Configuration]]
 
[[Category: SIP intercom - Configuration]]

Latest revision as of 14:33, 13 September 2019

AEIPS.png

All IP Stations have an embedded firewall.

  • Select Advanced Network > Firewall:
Firewall Settings


  • SSH [Turbine only]: Enable or disable SSH on station, disabled by default.
  • HTTP: Enable or disable HTTP on station, enabled by default.
  • HTTPS: Enable or disable HTTPS on station, enabled by default.
  • SIP (tcp) [Turbine only]: Enable or disable SIP over tcp on station, enabled by default.
  • SIPS [Turbine only]: Enable or disable SIPS on station, enabled by default.
  • Demo: Enable or disable DIP on station, disabled by default.
  • DIP: Enable or disable DIP on station, enabled by default.
  • TFTP Server: Enable or disable TFTP Server on station, enabled by default.
  • SNMP: Enable or disable SNMP on station, enabled by default.
  • SIP (udp): Enable or disable SIP over udp on station, enabled by default.
  • Pulse: Enable or disable Pulse on station, enabled by default.
  • mDNS: Enable or disable mDNS on station, enabled by default.
  • DIP Multicast: Enable or disable DIP Multicast on station, enabled by default.
  • Discovery: Enable or disable Discovery on station, enabled by default.
  • Zap [Turbine only]: Enable or disable ZAP on station, enabled by default.
  • ZapWeb [Turbine only]: Enable or disable ZapWeb on station, enabled by default.
  • VoIP: Enable or disable VoIP on station, enabled by default.


Note icon VoIP port range is configurable from firmware 2.7 (INCA) and 4.7 (Turbine) when the station is in SIP mode.